User's Guide Part 1

144
Camera
4
Press .
Images are recorded continuously with the shutter
sound, and the screen for confirming whether to
save the images appears.
5
Use to select an image and press
(Save).
The selected image is saved and the screen for
confirming whether to save another image appears.
To save another image
Select [Yes], select an image, and press
(Save).
To return to the Camera mode display
Select [No].
●
When you set the image size to [Stby(480
×
864)]
while the Shoot mode is set to [BestPic™], an
image is saved in landscape orientation even
if you record it with the FOMA terminal held
vertically. The Saved with this side up indication
“ ” does not appear in the Camera mode
display.
Recording Still Images in the
Continuous Mode
You can record four still images continuously at
an interval of about 0.2 seconds with a single
press of
or (Shoot).

The image size in the Continuous mode is [VGA(640
×
480)]. You cannot change the image size.

When you set the Shoot mode to [Continuous mode]
while the Select scene is set to [Night scene] or [Low
Light], the Select scene is changed to [AUTO].

When the Shoot mode is set to [Continuous mode],
the Image stabilize function is temporarily set to
[OFF].

If you use the flash when recording images using
the Continuous mode, the light intensity of the flash
drops to the photo light level.
1
Press (Func) in the Camera mode
display, select [
] (Shoot mode)
→
[
] (Continuous mode), and press .
2
Press (Close).
The Shoot mode is set to [Continuous mode] and
“
” appears.
3
Point the camera at the object and press
halfway.
The white focus frame/frames are used to adjust
the focus. When the image comes into focus, the
confirmation sound is heard, and the focus frame/
frames turn green.
4
Press .
Images are recorded continuously with the burst
sound, and the screen for confirming whether to
save the images appears.
5
Press (Save).
Four continuous images are saved.
Recording Images with Frames
You can record an image with a frame, which
can be selected from the preinstalled frames
or downloaded frames.

For Out-camera recording, you can select a frame
size of [QCIF(176
×
144)], [QVGA(240
×
320)],
[VGA(640
×
480)], and [Stand-by(480
×
864)]. For
In-camera recording, you can select the frame
size of [QCIF(176
×
144)], [QVGA(240
×
320)], and
[VGA(640
×
480)].

The size of images recorded with a frame is
determined according to the frame you selected
and cannot be changed.
1
Press (Func) in the Camera mode
display, select [
] (Shoot mode)
→
[
] (Shoot with frame), and press .
Ｓｅｌｅｃｔ ｆｒａｍｅ ｓｉｚｅ
ＱＣＩＦ（１７６ × １４４）
ＱＶＧＡ（２４０ × ３２０）
ＶＧＡ（６４０ × ４８０）
Ｓｔａｎｄ−ｂｙ（４８０ × ８６４）
2
Select a frame size and press .
The Frame display appears.