User's Guide Part 1

143
Camera
Recording an Image Using the
High Sensitivity Mode
You can record an image beautifully by
reducing the blurring of an object under low-
light condition or in a dark room without using
the flash.

The image size which can be recorded using the
High sensitivity is [QCIF(176
×
144)], [QVGA(240
×
320)], [VGA(640
×
480)], [Stby(480
×
864)], or
[1M(1280
×
960)].

When you set the Shoot mode to [High sensitivity]
while the image size is [2M(1632
×
1224)] or more,
the image size is changed to [1M(1280
×
960)].

When you set the Shoot mode to [High sensitivity],
the Flash is temporarily set to [OFF] and the Select
scene is set to [AUTO]. The setting of the Select
scene cannot be changed.
1
Press (Func) in the Camera mode
display, select [
] (Shoot mode)
→
[
] (High sensitivity), and press .
2
Press (Close).
The Shoot mode is set to [High sensitivity] and
“ ” appears.
3
Point the camera at the object and press
halfway.
The white focus frame/frames are used to adjust
the focus. When the image comes into focus, the
confirmation sound is heard, and the focus frame/
frames turn green.
4
Press .
An Image is recorded with the shutter sound and
the screen for confirming whether to save the image
appears.
5
Press (Save).
The image is saved.
Recording a Still Image Using
the BestPic™ Mode
Just by bringing an object into focus using the
Auto Focus function and pressing the shutter
key, you can record a total of nine continuous
still images in a moment before and after you
press the shutter key, from which you can
select the best shot.

The image size of BestPic™ is [VGA(640
×
480)],
[Stby(480
×
864)], [1M(1280
×
960)], [2M(1632
×
1224)], [2M Wide(1920
×
1080)], or [3M(2048
×
1536)].

When you set the Shoot mode to [BestPic™] while
the image size is [QCIF(176
×
144)] or [QVGA(240
×
320)], the image size is temporarily changed to
[Stby(480
×
864)].

When you set the Shoot mode to [BestPic™] while
the Auto Focus is set to [OFF], the Auto Focus is
changed to [Macro OFF].

When the Shoot mode is set to [BestPic™], the
Image stabilize and Auto save are temporarily set
to [OFF] and the Image quality is set to [Standard].
The image quality cannot be changed.

If you use the flash when recording images using
BestPic™, the light intensity of the flash drops to the
photo light level.

When you set the Shoot mode to [BestPic™] while
the Select scene is set to [Night scene] or [Low
Light], the Select scene is changed to [AUTO].
1
Press (Func) in the Camera mode
display, select [
] (Shoot mode)
→
[
] (BestPic™) and press .
2
Press (Close).
Ｌｏｃｋ Ａｕｔｏ ｆｏｃｕｓ Ｌｏｃｋ Ａｕｔｏ ｆｏｃｕｓ
The Shoot mode is set to [BestPic™] and “ ”
appears.
3
Point the camera at the object and press
halfway.
The white focus frame/frames are used to adjust
the focus. When the image comes into focus, the
confirmation sound is heard, and the focus frame/
frames turn green.
Continued