User's Guide Part 1

141
Camera
Decorating Images Fashionably
Using the Deco-Snap Mode
Using frames and stamps, you can decorate
images in fashionable way.

For Out-camera recording, you can select an image
size of [QCIF(144
×
176)], [QVGA(240
×
320)],
[VGA(480
×
640)], and [Stby(480
×
864)]. For In-
camera recording, you can select the image size of
[QCIF(144
×
176)] and [QVGA(240
×
320)].

When the Shoot mode is set to [Deco-Snap], the
following items are changed temporarily. The items
other than Select size, Switch camera, EV(Whitening
mode), and Flash cannot be changed.
Item Setting
Select size QVGA(240
×
320)
Switch camera In camera
Select scene AUTO
EV Whitening mode [OFF] : ±0.0EV
Face detection ON
※
1
Set attach loc. info OFF
Auto Focus Macro OFF
※
1
Multi focus Spot AF
※
1
Auto timer
※
2 5sec
Photo light OFF
Flash OFF
Grid Line OFF
White balance AUTO
Photometry Average
Picture effect OFF
Auto save OFF
Image quality Fine
Digital Zooming OFF
Image stabilize AUTO
Auto orientation OFF
※
1 The listed settings for the Face detection, Auto
Focus, and Multi focus are those assumed for use
of the Out-camera. These functions do not operate
when recording with the In-camera.
※
2 The previous setting of the Auto timer is not
restored even if the Shoot mode is changed.

Once you set the Shoot mode to [Deco-Snap], the
zoom magnification is set default to [
×
1.0] even if
the Shoot mode is changed to other setting.
1
Press (Func) in the Camera mode
display, select [
] (Shoot mode)
→
[
] (Deco-Snap), and press .
Ｓｅｌｅｃｔ ｓｉｚｅ
Ｓｔｂｙ（４８０
× ８６４）
Ｐｈｏｔｏｇｒａｐｈ ｉｍａｇｅ ｔｏ
ｆｉｔ ｔｈｅ ｓｉｚｅ ｏｆ
ｓｔａｎｄ−ｂｙ ｄｉｓｐｌａｙ
The Shoot mode is set to [Deco-Snap] and “ ”
appears.
When recording with the In-camera, point the
camera at the object and go to step 3.
To switch the camera
Select [ ] (Switch camera)
→
[ ] (Out
camera)/[ ] (In camera).
To set the Select size
Select [ ]
→
a size.
To record an image with a frame
Select [ ] (Frame)
→
[ ] (ON)/[ ] (OFF). If
you select [ON], select a frame.
To emit the flash light (Out-camera only)
Select [ ] (Flash)
→
a type of flash light.
To change the sound for Deco-Snap
Select [ ] (Deco-Snap beep)
→
a sound for
Deco-Snap.
To set the Whitening mode
Select [ ] (Whitening mode)
→
[ ] (ON)/[ ]
(OFF).

When the Whitening mode is set to [ON], the
EV is set to +1.0EV for the Out-camera and
+0.3EV for the In-camera. When set to [OFF],
the EV is set to ±0.0EV.
2
Point the camera at the object and press
halfway.
The Face detection function is activated and the
focus is adjusted based on a face. When the face
comes into focus, the confirmation sound is heard
and the Face detection frame turns green.
3
Press .
The Auto timer is activated and the Deco-Snap
beep is heard. An image is recorded with the
shutter sound, and the menu before saving images
appears.
Continued