User's Guide Part 1

137
Camera
Direct Key Operation
Frequently used functions are assigned a
Direct key. You can use Direct keys to change
settings with a simple key operation instead of
selecting from the Menu. Every time you press
the Direct key, the settings are changed.
For functions for which the Direct key operation
is available, the assigned Direct keys are also
mentioned in this manual.

Functions are assigned to the Direct keys as follows.
Operation Key operation Page
Select size Press or . P.159
Switch the Auto timer Press
. P.173
Switch the Flash Press
. P.174
Auto Focus setting Press . P.173
Decrease the EV value Scroll the Jog to left. P.162
Increase the EV value Scroll the Jog to right. P.162
Switch camera Press . P.159
Select scene setting Press
. P.160
White balance setting Press
. P.175
Photometry setting Press
. P.176
Switch ON/OFF of the
Grid Line
Press
. P.174
Picture effect setting Press
. P.176
Position the current
location
Press
for over a
second.
P. 1 72
Reset all setting Press
. P.177
Switch ON/OFF of the
Photo light
Press
. P.174
Switch the Shoot by
photo/Movie shoot
Press
. P.170

You may not be able to operate some functions
depending on the Shoot mode.
Example: Setting the Auto timer
1
Press in the Camera mode display.
Ａｕｔｏ ｔｉｍｅｒ：１０ｓｅｃ
Ｐｈｏｔｏｇｒａｐｈ １０ ｓｅｃｏｎｄｓ ａｆｔｅｒ
ｐｒｅｓｓｉｎｇ ｓｈｕｔｔｅｒ
Every time you press , the time is changed
among [OFF], [10sec], [5sec], and [2sec]. After
about 2 seconds without any operations, the
display restores and the Auto timer is set to the last
selected setting.
2
Press until the time you want or [OFF]
appears.
The Auto timer is set.
●
The Direct keys and functions assigned to them
can be checked on the Key operation guide
display that appears by pressing or sliding
the FOMA terminal to open.
Selecting an Image Size
You can select the size of a still image and
movie to be recorded from nine and four types,
respectively.

When the Shoot mode of the still image is set to
[Panorama], [Continuous mode], or [Shoot with
frame], you cannot select the image size.

When the size of a movie is set to [QVGA(320
×
240)] or [VGA(640
×
480)], the image quality of the
movie is changed to [Super fine]. When the size of
a movie whose image quality is [Super fine] is set to
[sQCIF(128
×
96)], the image quality of the movie is
changed to [Standard].
1
Press (Func) in the Camera mode
display, select [
] (Select size)
→
an
image size, and press
.

You can also set an image size by pressing
or in the Camera mode display.
The image size is set and the icon for the current
image size appears.

When the image size is set to [QVGA(240
×
320)]
or [Stby(480
×
864)], the saved with this side up
indication “
” appears. The image is saved with
the indicated side up.
Still image (Out-camera)
QCIF(176
×
144)
QVGA(240
×
320)
VGA(640
×
480)
Stby(480
×
864)
1M(1280
×
960)
2M(1632
×
1224)
2M Wide(1920
×
1080)
3M(2048
×
1536)

The image size which can be recorded with the
In-camera is [QCIF(176
×
144)], [QVGA(240
×
320)], or [VGA(640
×
480)].
Movie (Out-/In-camera)
sQCIF(128
×
96)
QCIF(176
×
144)
QVGA(320
×
240)
VGA(640
×
480)
Continued