User's Guide Part 1

135
Camera
Recording Still Images
<Shoot by photo>
When recording with the Out-camera, you
can record still images by focusing on five
spots in the display when the Multi focus is
set to [Multi AF] or a spot at the center of the
display when set to [Spot AF]. When the Auto
orientation is set to [ON], the orientation of
the FOMA terminal is automatically detected
while recording and orientation information is
recorded in the image file.

The allowable distance for the Auto focus between
the camera and an object is about 30 cm or more
using [Macro OFF], about 10 cm or more using
[Macro], and about 3 cm to 18 cm using [S-macro].

When the zoom magnification is increased into the
digital zoom range, the Multi focus function does
not operate even if the Multi focus is set to [Multi
AF]. An auto-focus function that finds a focus in the
central area of the display is used instead.

You cannot use the Auto Focus when you set
the Select scene to [Night scene]/[Low Light] for
recording still images.
1
Slide the lens cover to open in the
stand-by display.
The Camera mode is activated.

You can also activate the Camera mode by
sliding the lens cover to open in the menu
display.
2
Point the camera at the object and press
halfway down to focus on it.
ＭＥＮＵ
Ｓｈｏｏｔ
Ｆｕｎｃ
When the Multi focus is set to [Multi AF], objects
are brought to focus at up to five spots within the
white Multi focus frame. When set to [Spot AF], the
focus is adjusted using the white Spot focus frame
at the center of the display. When the image comes
into focus, the confirmation sound is heard, and the
focus frame/frames turn green.

While recording a still image, the Auto timer
indicator flashes.

When failed to adjust the focus, the white focus
frame/frames turn red.
To focus on an area other than the center of the
display when the Multi focus is set to [Spot AF]
Press halfway to focus, point the camera
where you want to record, and then press .
To switch to the In-camera
From the Function menu, select [ ] (Switch
camera)
→
[ ] (In camera).

When using the In-camera, the white focus
frame/frames do not appear, indicating that
the Auto Focus function is disabled.
To record images using (Shoot)
Press (Shoot). To focus on an area other than
the center of the display when the Multi focus
is set to [Spot AF], press to focus, point
the camera where you want to record, and then
press (Shoot).
3
Press .
A still image is recorded with the shutter sound and
the screen for confirming whether to save the image
appears.
4
Press (Save).
The still image is saved. You can display the saved
still image for checking by pressing .
To attach to mail
Press (Func) for over a second. The still
image is saved and the Edit mail display
appears. You can also attach an image to mail
by selecting [ ] from the Function menu.
To cancel a recorded image
Press and select [Yes].
To post on a blog
From the Function menu, select [ ] (P.358).
To add location information
From the Function menu, select [ ] (Location
info)
→
[ ] (Rcv location info). To display the
obtained detailed information, from the Function
menu, select [ ] (Location info)
→
[ ]
(Location detail) (P.277).
To save as a mirror image when recording with the
In-camera
From the Function menu, select [ ]. To switch
between Normal image and Mirror image, from
the Function menu, select [ ] (Display)
→
[ ]
(Mirror image)/[ ] (Normal image).

When you switch an image between Normal
image and Mirror image, the image is reversed
horizontally, seen in the orientation in which
it is saved. Depending on the orientation of a
saved image, the image may be displayed as
if it is reversed vertically.
Continued