User's Guide Part 1

126
Security Settings
Rejecting Calls with No
Caller ID
<Denied no ID>
When receiving a voice, videophone, or
PushTalk call without the caller’s phone number
displayed, the reason for not displaying it is
shown. You can decide whether to accept a
call based on the reason.

SMS and i-mode mail can be received regardless of
this function.

If you receive a call with no caller ID when the
Denied no ID is [ON], the call is not connected. The
missed call notification icon appears and the call is
saved in the Received record.
1
From the Menu, select [Settings]
→
[Lock/
Security]
→
[Denied no ID] and press
.
The Security code screen appears.
2
Enter the Security code and press
(OK).
Ｄｅｎｉｅｄ ｎｏ ＩＤ
Ｕｓｅｒ Ｕｎｓｅｔ ＯＦＦ
ＰｕｂｌｉｃＰｈｏｎｅ
ＯＦＦ
Ｎｏｔ ｓｕｐｐｏｒｔｅｄ
ＯＦＦ
3
Select [ON]/[OFF] of the Denied no ID for
each non-display reason.
The Denied no ID is set.
Muting the Ring Tone for Calls with
No Phonebook Entry
<Set ring start time>
You can set a time interval before starting
operation of the ring tone, incoming indicator,
and vibrator when you receive a voice,
videophone, or PushTalk call from a person/
group who is not saved in the Phonebook. This
function is also useful for blocking a nuisance
call such as from a malicious caller.

When the Reject unknown is set, you cannot set the
Set ring start time.
1
From the Menu, select [Settings]
→
[Call]
→
[Call assist]
→
[Set ring start time] and
press
.
Ｓｅｔ ｒｉｎｇ ｓｔａｒｔ ｔｉｍｅ
Ｓｅｔ
ＯＦＦ
Ｓｔａｒｔ ｔｉｍｅ
０４ ｓｅｃ
（０１−９９）
Ｍｉｓｓｅｄ ｃａｌｌ ｄｉｓｐｌａｙ
ＯＦＦ
2
Select [ON]/[OFF] for the Set ring start
time at [Set].
3
Enter the time before starting the ring
tone for an incoming call at [Start time].
Enter from 01 to 99 seconds.
4
Select [ON]/[OFF] at [Missed call display].
[ON]:
Display all calls in the Received record.
[OFF]:
For a call the start time of which is shorter than
the set time, neither the missed call notification
icon nor the received record is displayed. The
call is saved in the Received record. When the
operation of the record message or videophone
message is started, the notification icon of
missed call appears and the received record is
displayed.
5
Press (Complete).
The Set ring start time is set.
●
In the following cases, the Set ring start time
setting works to a call even if you receive it from
a person saved in the Phonebook.
- A call from a person saved as Secret in the
Phonebook (when the Secret display is set to
[OFF])
- A call with no caller ID
- When the Personal data lock is set
●
To display all received records when the Missed
call display is [OFF], from the Function menu in
the Received record display, select [Display all].
●
If the time set for the Start time is same as that for
the answer or ring times for the Record message,
Auto answer setting, Voice Mail Service, and Call
Forwarding Service, the ring tone may sound.