User's Guide Part 1

121
Security Settings
●
Any other active function is terminated when the
Omakase Lock is set.
●
The Omakase Lock can be used even when
another lock function is set. If you set the
Omakase Lock while the Public mode (Drive
mode) is set, you cannot receive a voice or
videophone call.
●
The Omakase Lock cannot be set if the FOMA
terminal is outside of the service area, in the Self
mode, or powered off.
●
The Omakase Lock cannot be set if you
subscribe to the Dual Network Service and use
the Mova service.
●
The Omakase Lock service locks the FOMA
terminal upon request from a subscriber of the
UIM inserted in the FOMA terminal. Even if this
UIM subscriber and user of the FOMA terminal
are different, the FOMA terminal is locked if
requested by the subscriber.
●
You can cancel the Omakase Lock only when
the UIM the phone number of which is the same
as of the one inserted when you set the lock is
inserted in the FOMA terminal. If the lock cannot
be canceled, call the “General Contact” on the
backcover of this manual.
●
When the Omakase Lock is set, the default ring
tone is used for an incoming voice or videophone
call. One of the images from the [Preinstall]
folder in My picture of the Data Box is used for
the incoming image. In this case, not the caller’s
name but the caller’s phone number is displayed.
Chaku-moji, if received, is not displayed, but
when you cancel the Omakase Lock, Chaku-moji
can be checked in the Received record (P.57).
●
When the Omakase Lock is set, you cannot send
a substitute image to answer a videophone call.
You can only adjust the volume of the caller’s
voice and switch the camera during a call.
●
When you set the Omakase Lock, the image
set for the stand-by display is changed to the
preinstalled [Cyber-shot Logo] image. The
i-Channel Telop text is not displayed.
Restricting Placing/
Receiving Calls
<Self mode>
You can disable all functions that involve calls
or communication, such as placing/receiving a
voice or videophone call, originating/receiving
a PushTalk call, and sending/receiving mail.
You cannot use infrared communication,
infrared remote control, and iC communication,
either.
1
From the Menu, select [Settings]
→
[Call]
→
[Self mode] and press
.
The screen for confirming whether to set the Self
mode appears.
To cancel the Self mode
Select [Yes] on the screen for confirming whether
to cancel the Self mode.
2
Select [Yes] and press .
The Self mode is set and “ ” appears.
●
Even if the Self mode is set, you can call
emergency numbers (110, 119, and 118).
The Self mode is canceled after you call an
emergency number.
●
If there is an incoming voice call when the
Self mode is set, the caller hears a guidance
informing that the FOMA terminal is outside of the
service area or the FOMA terminal is powered
off. When using the DoCoMo Voice Mail Service
or Call Forwarding Service, these services can
be used in the same manner as when the FOMA
terminal is powered off.
●
If you receive a PushTalk call when the Self mode
is set, the call is disconnected. If the received
call is for the PushTalk communication among
several persons, the message “ Disconnect”
appears in the On PushTalk display of the
members.