User's Guide Part 1

120
Security Settings
●
To call emergency numbers (110, 119, and 118)
when the Lock all is set, enter the emergency
number and press . The emergency number
is displayed as asterisks (
＊
) in the security code
input field of the Security code screen.
●
The FOMA terminal is powered off after five
unsuccessful attempts to cancel the Lock all.
●
When the Lock all is set, the default ring tone is
used for an incoming voice or videophone call.
One of the images from the [Preinstall] folder
in My picture of the Data Box is used for the
incoming image. In this case, not the caller’s
name but the caller’s phone number is displayed.
Chaku-moji, if received, is not displayed, but
when you cancel the Lock all, Chaku-moji can be
checked in the Received record (P.57).
●
When the Lock all is set, you cannot send a
substitute image to answer a videophone call.
You can only adjust the volume of the caller’s
voice or switch the camera during a call.
●
If there is an incoming PushTalk call when the
Lock all is set, the FOMA terminal does not
receive the call and the caller hears a busy tone.
The call is saved in the Received record. When
you cancel the Lock all, the notification icon “ ”
(Missed call) appears.
●
If you receive a request for your location
information while the Lock all is set, the FOMA
terminal answers the request. In this case, not
the caller’s name but the caller’s phone number
is displayed.
●
When the Lock all is set, i-mode mail, Message
R/F, and SMS are still received automatically,
however, the receiving operations, such as
displaying the incoming mail display or the
received mail display or the sounding of the ring
tone, are not performed and you are not notified
of the reception.
●
When you set the Lock all, the Alarm and
Schedule alarm do not operate.
●
When you set the Lock all, the image set for the
stand-by display is changed to the preinstalled
[Cyber-shot Logo] image. The i-Channel Telop
text is not displayed.
●
When you set the Lock all, the notification icons
other than “ ” (Answer X) are not displayed.
When you cancel the Lock all, the icons are
displayed again.
Using the Omakase Lock
Omakase Lock is a service that allows you to
lock the FOMA terminal remotely if you lose
the FOMA terminal by requesting DoCoMo
or using a procedure available on the My
DoCoMo website. Use this service to protect
your important private information and Osaifu-
Keitai.
You can also request DoCoMo by a call, etc. to
unlock the FOMA terminal.
※
Omakase Lock is a paid service. However, when
you subscribe to this service together with your
request to suspend the FOMA terminal or while the
FOMA terminal is suspended, the service charge is
not required.
※
If the Location request is set to ON while the
Omakase Lock is set, the FOMA terminal answers a
request of location information of the GPS function.
Setting/Canceling the Omakase Lock
0120-524-360 Service hours: 24 hours
※
You can also use your PC to set/cancel the lock
from the My DoCoMo website.

For details on how to use/charges, etc. of the
Omakase Lock, see the “Mobile Phone User’s Guide
【
Procedures and After-Sales Services
】
”.
Ｏｍａｋａｓｅ Ｌｏｃｋ
ａｃｔｉｖａｔｅｄ
The message “Omakase Lock activated” appears
and the Omakase Lock is set.

The Omakase Lock service locks a FOMA
terminal if it has an installed UIM card you are
currently subscribing to.

When the Omakase Lock is set, the user can
answer a voice or videophone call and power on/
off the FOMA terminal, but all keypad operation
is locked and all functions (including the IC card
function) are disabled.

When the Omakase Lock is set, the received mail
is stored at the Mail Center.

Although the user can power on/off the FOMA
terminal, powering off does not cancel the lock.

Note, however, that the UIM and microSD
memory card are not locked.