User's Guide Part 1

108
Sound/Display/Light Settings
Setting the Display for Incoming
and Outgoing Calls
<Call display>
You can set whether the Des call display or the
name saved in the Phonebook is displayed.
1
From the Menu, select [Settings]
→
[Call]
→
[Call display] and press
.
Ｓｅｔ ｃａｌｌ ｄｉｓｐｌａｙ
Ｐｈｏｎｅｂｏｏｋ ｉｍａｇｅ
ＯＮ
Ｎａｍｅ
ＯＮ
Ｄｉｓｐ． ｃａｌｌ／ｒｃｖ． Ｎｏ．
Ｎｏｎｅ ｓｐｅｃｉｆｉｅｄ
[Phonebook image]:
Set whether to display the Des call display set
for a specific individual/group saved in the
Phonebook.
[Name]:
Set whether to display the name of a caller/
recipient saved in the Phonebook.
[Disp. call/rcv. No.]:
Set the display or call record display when
placing/receiving a voice or videophone call, or
the color of the font for the received/sent mail
lists.
2
Select [ON]/[OFF] at [Phonebook image].
[ON]:
Display the image set for the Des call display in
the Phonebook when placing/receiving a voice
or videophone call.
[OFF]:
Display the image set in the Animation or
Incoming set when placing/receiving a voice or
videophone call.
3
Select [ON]/[OFF] at [Name].
[ON]:
Display the name saved in the Phonebook when
placing/receiving a voice or videophone call, or
originating/receiving a PushTalk call, or right after
receiving mail or SMS.
[OFF]:
Do not display the name saved in the Phonebook
when placing/receiving a voice or videophone
call, or originating/receiving a PushTalk call, or
right after receiving mail or SMS.
4
Select a color of the font to be displayed
at [Disp. call/rcv. No.].
[dark]:
Set the darker color for the display or call record
display when placing/receiving a voice or
videophone call, or the font for the received/sent
mail lists.
[light]:
Set the lighter color for the display or call record
display when placing/receiving a voice or
videophone call, or the font for the received/sent
mail lists.
[None specified]:
Do not specify the color of the font.

When 2in1 is set to ON, the information of
Number A/Address A is displayed in the font
color which is set at the Disp. call/rcv. No. To
display the information of Number B/Address B
in the different color, you can set at the Set call/
receive No. of the 2in1 setting (P.400).
Setting the Display and
Keypad Illumination
<Backlight>
You can set the display light brightness, ON/
OFF of the keypad light, and whether to turn on
the light of the display.
1
From the Menu, select [Settings]
→
[Display]
→
[Backlight] and press
.
Ｂａｃｋｌｉｇｈｔ
Ａｕｔｏ ｓｅｔｔｉｎｇ ＯＮ
Ａｄｊｕｓｔ ｌｉｇｈｔ
３
Ｋｅｙｐａｄ ｌｉｇｈｔ
ＯＮ
Ｂａｃｋｌｉｇｈｔ ａｌｗａｙｓ ｏｎ
[Auto setting]:
Set whether to adjust the display light brightness
and set ON/OFF of the keypad light automatically
by the Brightness Sensor to adapt for the
surrounding brightness.
[Adjust light]:
Set the display light brightness.
[Keypad light]:
Set whether to turn on the keypad light.
[Backlight always on]:
Set whether to keep the display light on all
the time including at the time of charging or
recording.
2
Select [ON]/[OFF] of adjusting
automatically at [Auto setting].