User's Guide Part 1

102
Sound/Display/Light Settings
Setting the Sound/Indicator
While Using the GPS Function
You can set the sound volume to be used and
the vibrator and incoming indicator operations
to be performed when you position and
notify your current location and when you are
requested to provide your location information.
Example: Setting the sound/indicator of the Position
location
1
From the Menu, select [LifeKit]
→
[GPS]
→
[GPS settings]
→
[Sound/Color setting]
and press
.
Ｓｏｕｎｄ／Ｃｏｌｏｒ ｓｅｔｔｉｎｇ
Ｐｏｓｉｔｉｏｎ ｌｏｃａｔｉｏｎ
Ｌｏｃａｔｉｏｎ ｎｏｔｉｃｅ
Ｌｏｃ． ｐｒｏｖｉｄｅ／ａｃｃｅｐｔ
Ｌｏｃ． ｐｒｏｖｉｄｅ／ｃｈｅｃｋ
[Position location]:
Set the operation to be performed when the
current location is determined.
[Location notice]:
Set the operation to be performed when the
current location is notified.
[Loc. provide/accept]:
Set the operation to be performed when you are
requested to provide location information when
the settings for using each service is set to “
許可
”
(accept).
[Loc. provide/check]:
Set the operation to be performed when you are
requested to provide location information when
the settings for using each service is set to “
毎回
確認
” (Check every time).
2
Select [Position location] and press .
Ｐｏｓｉｔｉｏｎ ｌｏｃａｔｉｏｎ
Ｖｏｌｕｍｅ ＯＦＦ
Ｖｉｂｒａｔｏｒ
ＯＦＦ
Ｃｏｌｏｒ
ＯＮ
3
Select the sound volume at [Volume].
Select from [OFF] and [1 to 6].
To set the volume to [OFF]
Press at level 1.
4
Select [ON]/[OFF] of the vibrator at
[Vibrator].
5
Select [ON]/[OFF] of the incoming
indicator at [Color].

You can set the incoming indicator to the Position
location and Location notice functions.
6
Press (Complete).
The sound volume level and incoming indicator ON/
OFF settings to be applied when you use the GPS
function are set.
Setting the Poor Signal
Quality Alert
<Quality alarm>
You can set to inform you with alarm of the
possibility of the call being disconnected
during a voice call due to the radio wave
condition.
1
From the Menu, select [Settings]
→
[Call]
→
[Call quality]
→
[Quality alarm] and
press
.
[High]:
Sound a high alarm tone.
[Low]:
Sound a low alarm tone.
[OFF]:
Do not sound an alarm tone.
2
Select the type of alarm tones and press
.
The Quality alarm is set.
●
If the radio wave condition becomes weak
suddenly, the call may be disconnected with no
alarm.