User's Guide Part 1

99
Sound/Display/Light Settings
5
Select a ring tone from MUSIC/i-motion/
Melody of the Data Box at [Ring tone].

You can set the following files. You can select a
Chaku-Uta
®
from [i-motion].
Category
File
format
File size Image size
MUSIC
※
AAC-LC/
HE-AAC
Max. 5M
bytes
−
i-motion
※
MP4 Max. 10M
bytes
Max. [VGA(640
×
480)]
Melody SMF/
MFi
Max. 350K
bytes
−
※
Some files may not be set. You cannot set an
i-motion with video track only. You can set only
an i-motion with sound track only (i-motion
without video track, such as singer’s voice) for
incoming PushTalk calls.
When you select a Chaku-Uta Full
®
that has a
choice of specified playback ranges from [MUSIC]
The screen for selecting a type of setting
appears. If you select [Full song], the entire track
of Chaku-Uta Full
®
is set for the ring tone. If you
select [Point], the specified playback range of
Chaku-Uta Full
®
is set for the ring tone.
To mute the ring tone
Select [Silent].
To check the ring tone
Move the cursor to the ring tone and press
(Play).
6
Set the volume of the ring tone at [Ring
volume].
Select from [OFF] and [1 to 6].

For an incoming voice, videophone, or PushTalk
call, you can set [STEP DOWN] and [STEP UP].
[STEP DOWN] turns down the volume every six
seconds and [STEP UP] turns up the volume
every six seconds.
To set the ring tone volume to [OFF]
Press at level 1. When you set the ring tone
volume for incoming calls, incoming mail, or both
incoming calls and mail to [OFF], “ ”, “ ”, or
“ ” appears in the stand-by display respectively.
7
Set a vibration pattern at [Vibrator].
Ｓｅｌｅｃｔ ｖｉｂｒａｔｏｒ
Ｐａｔｔｅｒｎ１
Ｐａｔｔｅｒｎ２
Ｌｉｎｋ ｍｅｌｏｄｙ
ＯＦＦ
[Pattern1]:
Set a short intermittent vibration.
[Pattern2]:
Set a long intermittent vibration.
[Link melody]:
Set vibration to be synchronized with the
vibration pattern of the melody. When you set the
ring tone to [Silent] or the melody is not specified
with a vibration pattern, [Pattern1] is used.
[OFF]:
Do not set the vibrator.
When you set the vibrator for incoming calls,
incoming mail, or both incoming calls and mail,
“
”, “ ”, or “ ” appears in the stand-by display
respectively.
To check the vibration
Move the cursor to the vibration pattern and
press (Confirm).
8
Select an indicator color at [Color].
Select from 12 colors plus [C13:ALL] (in which the
12 colors flash in turn).
When you move the cursor through the colors, the
incoming indicator flashes accordingly.
9
Select [Ring time] and press .

You can set the ring time for incoming mail,
Message R, and Message F.
10
Select [ON]/[OFF] of the ring tone at [Set].
11
Enter the duration for sounding the ring
tone at [Ring time].
Enter the duration within the range from 01 to 30
seconds.
12
Press (Complete).
The Ring time is set.
Continued