User's Guide Part 2

288
Data Display/Edit/Management
To change the Effect
While pausing, from the Function menu, select
[ ](Effect)
→
a type of effects.
To set the repeat on the Effect
While pausing, from the Function menu, select
[ ](Repeat)
→
[ ](ON)/[ ](OFF).
To change the BGM
While pausing, from the Function menu, select
[ ](BGM)
→
[ ](Data Box)
→
[Music]/[i-motion]
→
a BGM. To mute the BGM, select [
](Silent).
ˎ
When you select a Chaku-Uta Full
®
that has
a choice of specified playback ranges from
[MUSIC], the screen for selecting a type of
setting appears. If you select [Full song],
the entire track of Chaku-Uta Full
®
is set for
the BGM. If you select [Point], the specified
playback range of Chaku-Uta Full
®
is set for
the BGM.
To set the display quality
While pausing, from the Function menu, select
[ ](Change IQI)
→
[ ](Normal)/[ ](Sharp)/
[ ](Dynamic).
To end the Music slide show
Press to end the Music slide show and go
back to the stand-by display.
Editing Still Images
<Edit photo>
You can edit a JPEG image saved in My
picture by pasting a stamp, a frame, etc.
ˎ
You cannot edit preinstalled images, images
prohibited from being retrieved out of the FOMA
terminal, or images recorded with [Panorama] set at
the Shoot mode.
ˎ
Some images may not be edited.
ˎ
Images may become inferior by editing repeatedly.
Pasting a Frame
A frame can be pasted to an image of
[sQCIF(128
×
96)], [QCIF(176
×
144)],
[QVGA(240
×
320)], [CIF(352
×
288)],
[VGA(640
×
480)], and [Stby(480
×
864)].
Example: Pasting a frame and saving by overwriting
1
From My picture file list, select an image,
press , and press (Func).
The Function menu appears.
2
Select [Edit photo]
→
[Frame] and press
.
3
Select a frame and press .
To check a frame
Move the cursor to a frame and press (Play).
4
Press (Save), select [Overwrite], and
press .
The image with the frame is saved by overwriting
the original image.
To save as a new image
Select [Save new]
→
a place to save to.
Pasting a Stamp
A stamp can be pasted to an image of
[sQCIF(128
×
96)], [QCIF(176
×
144)],
[QVGA(240
×
320)], [CIF(352
×
288)],
[VGA(640
×
480)], and [Stby(480
×
864)].
Example: Pasting a stamp and saving by overwriting
1
From My picture file list, select an image,
press , and press (Func).
The Function menu appears.
2
Select [Edit photo]
→
[Image stamp] and
press .
3
Select a stamp and press .
To check a stamp
Move the cursor to a stamp and press (Play).
4
Use / to adjust the position
and press (Paste).
To add the same stamp
Repeat step 4.
To paste another stamp
Press (Retry) and perform step 3 to 4 again.
5
Press (OK).