User's Guide Part 2

449
Appendix/External Devices/Troubleshooting
Too many active functions.
Cannot activate
ˎ
You cannot execute the
selected function because
of too many functions being
executed by multitasking.
Quit a currently executed
function and then retry the
operation (P.349).
Too many active functions.
Cannot execute. Quit other
function and retry
ˎ
You cannot execute a
selected function because
of insufficient memory. Quit a
currently executed function
and then retry the operation
(P.349).
Too much data was entered
ˎ
Failed to send because
of too many characters.
Reduce the number of
characters and try to send
again.
Transmission failed
ˎ
An error occured while
sending mail. Make sure that
“
” is not displayed and
send it again. If the message
appears again, retry to send
after a while (P.209).
ˎ
The address of SMS is
incorrect. Enter the correct
address (phone number)
and send again (P.230).
Transmission failed (552)
ˎ
Failed to connect to a line
due to a problem at the
i-mode or SMS center. Retry
to connect after a while.
U
UIM is full
ˎ
The number of SMS saved
in the UIM has reached the
maximum number. Delete
unnecessary SMS (P.219).
UIM is not inserted. Content is
unavailable
ˎ
Failed to operate because
the UIM is not inserted.
Insert the UIM that was used
when you retrieved the data
or file and then retry the
operation (P.36).
Unable to obtain data due to
replay restriction data error
ˎ
Failed to obtain the file
because of an error in the
playback restriction data.
Unable to retrieve the
requested URL (504)
ˎ
Failed to connect to the site
or website for some reason.
Retry to connect.
Unable to run this software
ˎ
When 2in1 is set to the
B mode, you cannot run
i-
α
ppli with mail or i-
α
ppli
using mail.
Unable to update pattern
definitions
ˎ
Failed to update pattern
definitions because of error
occurrence.
Unable to use in My Data B
ˎ
You cannot originate a
PushTalk call from the Own
number display of the B
mode.
Unsupported microSD
ˎ
A non-compatible microSD
memory card is installed in
the FOMA terminal. Install a
FOMA terminal-compatible
microSD memory card
(P.307).
URL is too long to register
ˎ
Failed to save the site as
a bookmark because the
URL exceeds 256 half-width
characters (P.187).
Usage is currently restricted.
Try again later
ˎ
Users of the flat-rate i-mode
packet service may not
be able to connect during
certain hours because
of sharp increase in
communication traffic. In this
case, wait for a while until
you can use i-mode.
Use ToruCa automatic reading
func through the reader/writer?
ˎ
Auto recognition is set to
[OFF] (P.256).
Y
Your HTTP version is not
supported (505)
ˎ
You tried to connect to the
site, etc. not supporting
i-mode.
Symbol
error
ˎ
An error occurred while
running the i-
α
ppli software.
Start to run again or check
the error history (P.246).
“
○
△
□
.ne.jp”
宛のメールが混み
合っているため、送信すること
ができません（
555
）
(Failed
to send mail to “
○
△
□
.ne.jp”
because the line is congested)
※
Domain names vary
depending on each
recipient.
ˎ
The line is extremely
congested. Wait for a while
and then retry the operation.