User's Guide Part 2

443
Appendix/External Devices/Troubleshooting
Continued
ˎ
Failed to connect to a line
due to a network problem.
Retry to connect after a
while.
ˎ
Failed to connect to a line for
some reason when placing a
videophone call.
Connection failed (403)
ˎ
Failed to connect to i-mode
for some reason. Retry to
connect (P.182).
Connection failed (503)
ˎ
Failed to connect to a line
due to a network problem.
Retry to connect after a
while.
Connection failed (562)
ˎ
Failed to connect to the
i-mode center. Move to a
location with better radio
wave condition and then
retry the operation.
Connection interrupted
ˎ
The communication is
interrupted because of an
error occurrence during data
communication.
Content length exceeds
maximum size for i-motion
ˎ
Failed to retrieve the data
because its volume has
exceeded the maximum
size.
Content length exceeds
replayable size for i-motion
ˎ
Failed to retrieve the data
because its volume has
exceeded the maximum
size.
Continue using ppli and
transmit data?
ˎ
This message appears
when the number of times of
communication performed
while an i-
α
ppli software
is used has increased
significantly for a certain
period of time. To continue
using the i-
α
ppli software,
select [Yes]. To continue using
the i-
α
ppli software after the
communication is terminated,
select [No]. To quit the i-
α
ppli
software, select [Terminate].
Could not move
ˎ
Failed to move data because
of an error occurrence.
Could not save
ˎ
Failed to save the image,
music data, or i-
α
ppli
software.
ˎ
Failed to save to the
microSD memory card.
ˎ
Failed to receive data
during the infrared/iC
communication or data
communication with a PC.
ˎ
Failed to save the image or
melody scanned by the bar
code reader.
ˎ
Failed to save the i-motion
because the size exceeded
10M bytes. You can set a
Chaku-Uta Full
®
with up to
10M bytes of i-motion for the
ring tone/Alarm using [Point].
D
Data in IC card is full. Unable
to download. Delete service?
ˎ
Failed to download the data
because the Osaifu-Keitai-
compatible i-
α
ppli IC card
is full of data. When you
select [Yes], the names of
the Osaifu-Keitai services
on the card appear. Select
a service name and delete
its Osaifu-Keitai-compatible
i-
α
ppli software and data
from the IC card.
Data transmission is frequent.
Continue transmission?
ˎ
This message appears
when the number of times of
communication performed
while an i-
α
ppli software
is used has increased
significantly for a certain
period of time. To continue
using the i-
α
ppli software,
select [Yes]. To continue using
the i-
α
ppli software after the
communication is terminated,
select [No]. To quit the i-
α
ppli
software, select [Terminate].
Deleted invalid text
ˎ
Characters other than digits
cannot be accepted for
the postal code. They are
discarded.
Download failed
ˎ
Failed to download because
of an error occurrence.
Draft is full. Cannot create
ˎ
The number of saved mail
has reached 50 or there is
not enough memory. Delete
unnecessary saved mail
(P.219).
E
Error in IC card data. Unable
to delete software
ˎ
Failed to delete the software
because data in the Osaifu-
Keitai-compatible i-
α
ppli IC
card contains an error.
Error in image. Does not work
correctly
ˎ
The Flash movie cannot be
played back correctly due
to some errors in the Flash
movie.