User's Guide Part 1

PushTalk
84
●
Members added during PushTalk communication are not displayed in the detailed
information of the Redial/Received record.
●
You can add a party who uses a PushTalk-compatible model, as a PushTalk group member.
However, this added member is not displayed on the displays of non-compatible models
and the signal tone does not sound either.
Receiving a PushTalk Call
When you receive a PushTalk call, you are notified by flashing indicator, ring tone,
vibrator, etc. The operation for an incoming PushTalk call varies depending on the
settings of the Incoming set, Manner mode, etc.
ˎ
If you receive a PushTalk call during a voice call, the PushTalk call is not connected. The
notification icon of missed call appears and the call is saved in the Received record. A
PushTalk call received during a videophone call or data communication is not connected,
either. The call is not saved in the Received record.
ˎ
When receiving a PushTalk call during i-mode communication, the setting for the i-mode arrival
act is applied.
1
When you receive a PushTalk call, press or .
ドコモ一郎
ドコモ三郎
ドコモ二郎
０９０ＸＸＸＸＸＸＸＸ
ＰｕｓｈＴａｌｋ Ｇｒ ｃａｌｌ
ドコモ二郎
ドコモ一郎 Ｃｏｎｎｅｃｔｅｄ
ドコモ三郎 Ｃｏｎｎｅｃｔｅｄ
ドコモ二郎 Ｃｏｎｎｅｃｔｅｄ
０９０ＸＸＸＸＸＸＸＸ
Ｃａｌｌｉｎｇ
Ｏｎ ＰｕｓｈＴａｌｋ
When the call is answered, it is switched to the hands-free operation that
allows you to hear the recipient’s voice from the speaker.
When you do not want to answer the call
Press .
The names of the members appear. If the member is not saved in the
Phonebook, this member’s phone number appears instead.
ˎ
When the person who originates a PushTalk call sets the Set
Notification to [Notify], all members including added members are
notified the phone numbers of the person who originates and all
members. When the person sets it to [Not notify], all members are
displayed as [User Unset].
To speak
Press while the floor is open. You can speak while you press and
hold
.
2
Press to end the communication.
●
You can answer a PushTalk call by pressing (Answer) instead of or . When
you set the Any key answer to [ON], you can also press
to , , or to answer
a PushTalk call (P.67). When the Slide open setting is set to [Calling], you can answer a
PushTalk call just by opening the FOMA terminal (P.67).
●
A PushTalk call cannot be put on hold.
●
When you receive a PushTalk call originated from a caller who is saved as a nuisance caller,
the call is rejected. The notification icon of missed call appears and the call is saved in the
Received record.