User's Guide Part 1

Camera
177
Setting Whether to Add Location Information to an Image When Saving
You can add location information automatically to a recorded still image using the
GPS function.
1
Press (Func) in the Camera mode display, select [ ], and press .
2
Select [Set]
→
[Set attach loc. info] and press .
Ｓｅｔ ａｔｔａｃｈ ｌｏｃ． ｉｎｆｏ
Ａｕｔｏ ａｔｔａｃｈ ｌｏｃ． ｉｎｆｏ
ＯＮ
Ａｔｔａｃｈ ｌｏｃ． ｉｎｆｏ ｍｅｔｈ．
Ｆｒｏｍ ａｃｔ． ｃａｍｅｒａ
Ｌｏｃａｔｉｏｎ ｉｎｆｏ
[Auto attach loc. info] :
Select whether to add location information
automatically when saving an image.
[Attach loc. info meth.] :
Select an obtaining method of location
information to be added automatically.
[Location info] :
Save location information to be added to an
image.
3
Select [ON]/[OFF] of whether to add location information automatically at
[Auto attach loc. info].
4
Select [From saved info]/[From act. camera] at [Attach loc. info meth.].
[From saved info] :
Add the location information saved in the Location info.
[From act. camera] :
Obtain location information when activating the camera and add it.
5
Save location information at [Location info].
ˎ
To save location information, see “Adding the Location Information” (P.273, step 2 to 3).
When the location information is already saved
The Has loc. info display appears. To check the location information, select [Check]. To
change the location information, select [Change] and obtain location information. To delete
the location information, select [Delete]
→
[Yes].
6
Press (Complete).
The Set attach loc. info is set.
When the Auto attach loc. info is set to [ON], the Set attach loc. info is set and “
” appears.
●
When the Auto attach loc. info is set to [ON], it may take time to start next recording.
●
When the Auto attach loc. info is set to [ON] and the Attach loc. info meth. is set to [From act.
camera], the icon which shows the accuracy appears in the Camera mode display (P.154).
●
If the positioning is failed when activating the camera, you can do it manually by pressing
for over a second in the Camera mode display.
Resetting File Numbers
When a still image with the file number (P.151) “999-9999” is saved in the microSD
memory card, no more still images can be saved even if there is a vacant space in
these memories. The Reset file No. allows you to reset the file numbers up to the
largest file number saved in the microSD memory card. To reset the file numbers,
delete still images that have file numbers larger than that you want to reset
beforehand.
ˎ
The images cannot be saved even if the file numbers are reset when the microSD memory card
has no free space. In this case, change the microSD memory card or delete data saved in the
microSD memory card.
Continued