User's Guide Part 1

Camera
170
Turning on the Photo Light
The FOMA terminal’s built-in photo light can be used when recording with the Out-
camera in a dark place, etc.
1
Press in the Camera mode display.
Every time you press , the photo light is switched to [ON]/[OFF].
When switched to [ON], the photo light is turned on and “
” appears.
●
The photo light is for helping you record in a dark place. You cannot expect as much amount
of light from the photo light as from the electric flash of a normal camera.
Emitting the Flash
You can use the flash when recording with the Out-camera in a dark place.
ˎ
When the Shoot mode is set to [BestPic™] or [Continuous mode], if you use the flash when
recording images, the light intensity of the flash drops to a lower value as if the photo light is
turned on.
ˎ
When the Shoot mode is set to [Panorama], the Flash is set to [OFF] temporarily.
1
Press (Func) in the Camera mode display, select [ ], and press .
2
Select [Shoot]
→
[Flash] and press .
ˎ
You can also set the Flash by pressing
in the Camera mode display.
[AUTO] :
The flash is emitted depending on the brightness of surroundings.
[Forced ON] :
The flash is always emitted.
[OFF] :
The flash is not emitted.
3
Select a flash type and press .
The Flash is set and the icon for the current Flash setting appears.
ˎ
No icon appears for [AUTO].
Forced ON OFF
Using the Grid Line
You can arrange positions of objects on the display nicely using the displayed 3
×
3
lattice Grid Line to record an image.
ˎ
When the Shoot mode is set to [Deco-Snap], the Grip Line does not appear.
1
Press (Func) in the Camera mode display, select [ ], and press .
2
Select [Shoot]
→
[Grid Line] and press .
ˎ
You can also set the Grid Line by pressing
in the Camera mode display.
3
Select [ON]/[OFF] and press .
When you select [ON], the Grid Line appears.