User's Guide Part 1
Camera
168
●
When there is not enough memory or the number of recorded time of saved movies exceeds
the maximum number, the message appears. Change the place to save the movie or delete
unnecessary movies. Even if recording is possible, the maximum recording time may not be
achieved.
●
When you switch to movie recording from still image recording, the following items are reset.
Item Default setting Item Default setting
Switch camera Out camera Select scene AUTO
Zoom magnification
×
1 EV ±0.0EV
Shoot mode Regular Auto timer OFF
Photo light OFF Grid Line OFF
White balance AUTO Photometry Center
Picture effect OFF
●
Noise in the form of a mosaic may appear in an image or the image or sound may be
interrupted while you are recording a movie. Note that this is not malfunction.
●
The movie sound is recorded via the microphone of the FOMA terminal. If you operate the
keys or block the microphone during recording, the recording may be affected by the sound
of the keys and other noise.
●
The motion of the recorded movie may be rough depending on the object you are shooting
and the recording conditions.
Changing the Camera Settings
Using the Auto Focus Functions Properly
When recording a still image with the Out-camera, you can record a beautiful image
nicely and easily by using the settings of the Auto Focus efficiently depending on the
conditions of an object, such as when there are two persons alongside while recording.
ˎ
You can only bring an object into focus on the displayed focus frame within the optical zoom
range. When the zoom magnification is in the digital zoom, the focus frame is changed to “
”
and it becomes very difficult to bring an object into focus.
ˎ
When the Auto Focus is set to [OFF], the focus frame does not appear.
1
Press (Func) in the Camera mode display, select [ ], and press .
Ａｕｔｏ Ｆｏｃｕｓ
Ｍｕｌｔｉ ｆｏｃｕｓ
Ａｕｔｏ ｔｉｍｅｒ
Ｐｈｏｔｏ ｌｉｇｈｔ
Ｆｌａｓｈ
Ｇｒｉｄ Ｌｉｎｅ
Ｑｕｉｔ ｃａｍｅｒａ
Ｍａｃｒｏ ＯＦＦ
Ｍｕｌｔｉ ＡＦ
ＯＦＦ
ＯＦＦ
ＯＦＦ
ＯＦＦ
Ｓｈｏｏｔ
Ａｄｊｕｓｔ
Ｓｅｔ
2
Select [Shoot]
→
[Multi focus] and press .
[Multi AF] :
Five focus frames are displayed. The focus frame which is the closest to an
object is focused on the object. It is recommended to use when recording such
as two persons stand alongside.
[Spot AF] :
The focus frame is displayed in the center of the display and you use it to focus
on an object. It is recommended to use when you want to focus exactly on the
place where you want to record.