User's Guide Part 1

Camera
165
Recording a Panoramic Image
After you press the shutter, keep the camera in a horizontal position and move it to
record images serially, and connect to each other and save as a single image. You
can also record a panoramic image with a 360-degree field of view.
ˎ
The Auto timer cannot be set.
ˎ
When the Shoot mode is set to [Panorama], the Picture effect is changed to [OFF]. Also,
temporarily, the Flash is set to [OFF], and the Auto Focus and Face detection are set to [OFF].
1
Press (Func) in the Camera mode display, select [ ] (Shoot mode)
→
[ ] (Panorama), and press .
The Select size display appears.
[360°] :
Up to 10 images are recorded and you can create one image with a 360-degree field
of vision around you.
[VGA] :
Up to four images are recorded to create one image.
2
Select a recording size and press .
3
Press (Close).
The Shoot mode is set to [Panorama] and “ ” appears.
4
Press .





The first image is recorded with the shutter sound. Keep
the FOMA terminal in a horizontal position and slowly move
it in one direction. Every time an image is recorded, the
shutter sound is heard.
To stop recording
Press (Stop). If the screen for confirming whether
to composite images appears, select [Activate]/[Erase
photo].

Guide to show the recording direction
ˎ
Move the camera along with the direction of the arrow.

Number of recordable images
Green: Recorded Black: Not recorded yet

Number of images to be recording next

Previously recorded image

Current direction of the camera
ˎ
The green frame moves along with the direction of the camera. When the recording
position comes in, the color of the frame changes to red.
5
Press (Save).
Two to ten recorded still images are connected to each other and saved as a single image.
To check the images which are not displayed
Use to move images.
Continued