User's Guide Part 1

Camera
163
Recording Still Images in the Continuous Mode
You can record four still images continuously at an interval of about 0.2 seconds with
a single press of (Shoot) or .
ˎ
The image size in the Continuous mode is [VGA(640
×
480)]. You cannot change the image size.
ˎ
When you set the Shoot mode to [Continuous mode] while the Select scene is set to [Night
scene] or [Low Light], the Select scene is changed to [AUTO].
ˎ
When the Shoot mode is set to [Continuous mode], the Image stabilize function is temporarily
set to [OFF].
ˎ
If you use the flash when recording images using the Continuous mode, the light intensity of the
flash drops to a lower value as if the photo light is turned on.
1
Press (Func) in the Camera mode display, select [ ] (Shoot mode)
→
[ ] (Continuous mode), and press .
2
Press (Close).
The Shoot mode is set to [Continuous mode] and “ ”
appears.
3
Point the camera at the object and press halfway.
The white-framed focusing window is used to adjust the focus. When the image comes into
focus, the confirmation sound is heard, and the focusing window turns green.
4
Press .
Images are recorded continuously with the burst sound, and the screen for confirming
whether to save the images appears.
5
Press (Save).
Four continuous images are saved.
Recording Images with Frames
You can record an image with a frame, which can be selected from the preinstalled
frames or downloaded frames.
ˎ
For Out-camera recording, you can select a frame size of [QCIF(176
×
144)], [QVGA(240
×
320)], [VGA(640
×
480)], and [Stand-by(480
×
864)]. For In-camera recording, you can select
the frame size of [QCIF(176
×
144)], [QVGA(240
×
320)], and [VGA(640
×
480)].
ˎ
The size of images recorded with a frame is determined according to the frame you selected
and cannot be changed.
1
Press (Func) in the Camera mode display, select [ ] (Shoot mode)
→
[ ] (Shoot with frame), and press .
Ｓｅｌｅｃｔ ｆｒａｍｅ ｓｉｚｅ
ＱＣＩＦ（１７６ × １４４）
ＱＶＧＡ（２４０ × ３２０）
ＶＧＡ（６４０ × ４８０）
Ｓｔａｎｄ−ｂｙ（４８０ × ８６４）
Continued