User's Guide Part 1
Camera
155
Recording Still Images
<Shoot by photo>
When recording with the Out-camera, you can use the Auto Focus function to
focus on an object at the center of the display and record still images. When the
Auto orientation is set to [ON], the orientation of the FOMA terminal is automatically
recognized and record an image while recording.
ˎ
The allowable distance for the Auto focus between the camera and an object is about 30 cm or
over using [Macro OFF], about 10 cm or over using [Macro mode], and about 3 cm to 18 cm
using [Super Macro mode].
ˎ
You cannot use the Auto Focus when you set the Select scene to [Night scene]/[Low Light] for
recording still images.
ˎ
If an image recoded when the Auto orientation is set to [ON] is attached to mail or posted on
a blog, depending on the recipient’s terminal or site where it is posted, the image may not be
displayed correctly facing the vertical/horizontal direction.
1
Slide the lens cover to open in the stand-by display.
The Camera mode is activated.
ˎ
You can also activate the Camera mode by sliding the lens cover to open in the menu
display.
2
Point the camera at the object and press halfway down to focus on it.
Ｓｈｏｏｔ
Ｆｕｎｃ
Ｚｏｏｍ（Ｔ）
Ｚｏｏｍ（Ｗ）
ＭＥＮＵ
The white-framed focusing window is used to adjust the
focus. When the image comes into focus, the confirmation
sound is heard, and the focusing window turns green.
ˎ
While recording a still image, the Auto timer indicator
flashes.
ˎ
When failed to adjust the focus, the white-framed
focusing window turns red.
To focus on an area other than the center of the display
Press halfway to focus, point the camera where you
want to record, and then press
.
To switch to the In-camera
From the Function menu, select [ ] (Switch camera)
→
[
] (In camera).
ˎ
When using the In-camera, the white-framed focusing
window does not appear, indicating that the Auto
Focus function is disabled.
To record images using (Shoot)
Press (Shoot). To focus on an area other than the
center of the display, press
to focus, point the
camera where you want to record, and then press
(Shoot).
3
Press .
A still image is recorded with the shutter sound and the screen for confirming whether to save
the image appears.
Continued