User's Guide Part 1

Security Settings
135
Locking the Keypad to Prevent Unauthorized Use
<Lock all>
You can set the Lock all to prevent others from using the FOMA terminal. When the
Lock all is set, you cannot perform any operation other than powering on/off the
FOMA terminal and answering a voice or videophone call.
1
From the Menu, select [Settings]
→
[Lock/Security]
→
[Lock all] and press
.
The Security code screen appears.
2
Enter the Security code and press (OK).
The screen for confirming whether to set the Lock all appears.
3
Select [Yes] and press .
The Lock all is set and the message “Lock all” appears in the stand-by display.
To cancel the Lock all
Enter the Security code and press (OK).
●
To call emergency numbers (110, 119, and 118) when the Lock all is set, enter the
emergency number and press
. The emergency number is displayed as asterisks (
＊
) in
the security code input field of the Security code screen.
●
The FOMA terminal is powered off after five unsuccessful attempts to cancel the Lock all.
●
When the Lock all is set, the default ring tone is used for an incoming voice or videophone
call. One of the images from the [Preinstall] folder in My picture of the Data Box is used
for the incoming image. In this case, not the caller’s name but the caller’s phone number
is displayed. Chaku-moji, if received, is not displayed, but when you cancel the Lock all,
Chaku-moji can be checked in the Received record (P.57).
●
When the Lock all is set, you cannot send a substitute image to answer a videophone call.
You can only adjust the volume of the caller’s voice or switch the camera during a call.
●
If there is an incoming PushTalk call when the Lock all is set, the FOMA terminal does not
receive the call and the caller hears a busy tone. The call is saved in the Received record.
When you cancel the Lock all, the notification icon “
” (Missed call) appears.
●
If you receive a request for your location information while the Lock all is set, the FOMA
terminal answers the request. In this case, not the caller’s name but the caller’s phone
number is displayed.
●
When the Lock all is set, i-mode mail, Message R/F, and SMS are still received automatically,
however, the receiving operations, such as displaying the incoming mail display or the
received mail display or the sounding of the ring tone, are not performed and you are not
notified of the reception.
●
When you set the Lock all, the Alarm and Schedule alarm do not operate.
●
If you set the Lock all, the settings of the stand-by display and Kisekae Tool are changed to
those of [Manual Custom]. The i-Channel Telop text is not displayed.
●
When you set the Lock all, the notification icons are not displayed. When you cancel the
Lock all, the icons are displayed again.
Continued