User's Guide Part 1

Sound/Display/Light Settings
119
11
Press and select [ON]/[OFF] at [Soft key].
The Soft key is set.
●
If you change the setting so that the i-Channel Telop text is displayed when an i-motion
or i-
α
ppli is set for the stand-by display, the screen for confirming whether to cancel the
setting for the stand-by display appears. If you select [Yes], the i-motion or i-
α
ppli set for
the stand-by display is canceled and the image for the stand-by display is changed to that
of the Kisekae menu.
●
If you set an i-motion or i-
α
ppli for the stand-by display when the i-Channel Telop text is
displayed, the screen for confirming whether to cancel the display of the Telop text appears.
If you select [Yes], the Telop text is turned off. When you change the setting for the stand-by
display to other than an i-motion or i-
α
ppli, the display of the Telop text is automatically restored.
●
Even if the Soft key is set to [OFF], you can operate the FOMA terminal normally.
●
If you set an i-motion for the stand-by display, the playback starts in the case, such as when
you open the FOMA terminal, return to the stand-by display, or press
in the stand-by
display, and the first frame of it is displayed as the stand-by display image. While the i-motion
is played back, the setting of the Calendar is not displayed.
●
If you set a Flash movie or GIF animation for the stand-by display, the playback starts in the
case, such as when you open the FOMA terminal, return to the stand-by display, or press
in the stand-by display. The playback stops after a certain period of time. A frame
displayed at the time of the playback being stopped is used as the stand-by display image.
To restart the playback, press
(however, while displaying the i-Channel Telop text, the
playback does not start even if you press
). The sound effect of the Flash movie set for
the stand-by display is not heard.
●
The displayed contents of Stand-by books are employed using part of examples/
explanations.
Setting the Stand-by Pictures
Several images in the specified folder can be displayed in the stand-by display
automatically using a template. A template is set the decorations for images such as
a frame beforehand. The images are rotated in the specified interval.
ˎ
GIF/JPEG images saved in My picture of the Data Box can be used as Stand-by pictures.
1
From the Menu, select [Imaging]
→
[Stand-by pictures] and press .
Ｓｔａｎｄ−ｂｙ ｐｉｃｔｕｒｅｓ
Ｔｅｍｐｌａｔｅ
Ｐａｔｔｅｒｎ０１
Ｓｃｒｅｅｎ ｕｐｄａｔｅ
Ｅｖｅｒｙ １ｈｏｕｒｓ
Ｓｅｌｅｃｔ ｆｏｌｄｅｒ
Ｕｐｄａｔｅ ｉｍａｇｅ
2
Select a template to be used at [Template].
Select from [Pattern01 to 08] or [Random display].
To check a template
Move the cursor to the template and press (Play).
3
Select an interval to change images at [Screen update].
Select from [Every 30min], [Every 1hours], [Every 3hours], [Every 6hours], [Every 12hours],
or [Every days].
Continued