User's Guide Part 1

Sound/Display/Light Settings
111
●
If several ring tones, call images, and incoming indicator colors are set for voice/videophone
call/mail, the following priority is applied.

1. Ring tone of Number Setting (When you receive a call to an Additional No. for the Multi
Number)

2. Des phone tone, Des call display, and Select phone/mail Illum. of an entry saved in the
Phonebook

3. Des phone tone, Des call display, and Select phone/mail Illum. of the Group setting

4. Ring tone of the Ringtone for Number B of 2in1

5. Ring tone, incoming image, and indicator color of the Incoming set

However, when you set an i-motion or Chaku-Uta Full
®
for the ring tone or an i-motion for the
incoming image, the order of priority may vary.
●
You can adjust the ring volume while receiving a call. The volume last set is applied
regardless of whether you adjust the volume in advance or while receiving a call.
●
When you set an i-motion or Chaku-Uta Full
®
for the ring tone or set an i-motion for the
incoming image, the settings may be changed in some cases.
Setting the Sounds of the FOMA Terminal
<Set basic tone>
You can set to turn on/off the sound effect that can be used when canceling the Lock
key or charging starts and is completed. You can also set whether the 3D sound is
played back through the stereo speaker and set the keypad sound volume.
1
From the Menu, select [Settings]
→
[Management]
→
[Set basic tone] and
press .
Ｓｅｔ ｂａｓｉｃ ｔｏｎｅ
Ｋｅｙｐａｄ ｓｏｕｎｄ １
Ｋｅｙｇｕａｒｄ ｒｅｌ
ＯＮ
Ｓｔｅｒｅｏ＆３Ｄ
ＯＮ
Ｃｈａｒｇｅ ｓｏｕｎｄ
ＯＮ
[Keypad sound] :
Set the volume of the keypad sound to be heard when
you press a key.
[Keyguard rel] :
Set whether the sound effect is heard when canceling
the Lock key.
[Stereo&3D] :
Set whether to play back 3D sound with 3-dimensional
stereophonic reproduction through the stereo speaker.
[Charge sound] :
Set whether the sound effect is heard when charging
starts and is completed.
2
Set the volume of the keypad sound at [Keypad sound].
Select from [OFF] and [1 to 2].
3
Select [ON]/[OFF] at [Keyguard rel].
4
Select [ON]/[OFF] at [Stereo&3D].
5
Select [ON]/[OFF] at [Charge sound].
The sounds of the FOMA terminal are set.
●
The Keyguard rel and Charge sound may not be heard under some conditions, such as
when another sound is active.
●
The 3D sound function reproduces a 3-dimensional stereophonic sound or space-wise
moving sound, over the stereo speaker (or the Flat-Plug Stereo Earphone Set (optional)).
This function lets you enjoy 3D sound i-
α
ppli games and ring tones with realistic sound.
You can feel the effect of this function when you hold the FOMA terminal about 40 cm (this
distance depends on the sense of an individual) away and facing toward you. Note that if
the FOMA terminal is moved left or right or the distance between the terminal and you is not
suitable, you cannot enjoy the effect. The perception of this 3D effect varies depending on
the senses of an individual. If you feel uncomfortable in any way, set the Stereo&3D to [OFF].