User's Guide Part 1

Sound/Display/Light Settings
109
Continued
4
Select an image from the Data Box at [Received image].
ˎ
You can set the following files.
Category File format File size Image size
My picture GIF/JPEG Max. 250K bytes Max. [Stand-by(480
×
864)],
Max. W480
×
H288 for GIF animation
SWF Max. 100K bytes
−
To check the Received image
Move the cursor to the Received image and press (Play).
5
Select a ring tone from MUSIC/i-motion/Melody of the Data Box at [Ring
tone].
ˎ
You can set the following files. You can select a Chaku-Uta
®
from [i-motion].
Category File format File size Image size
MUSIC
※
AAC-LC/HE-AAC Max. 5M bytes
−
i-motion
※
MP4 Max. 10M bytes Max. [VGA(640
×
480)]
Melody SMF/MFi Max. 350K bytes
−
※
Some files may not be set. You cannot set an i-motion with video track only. You can set
only an i-motion with sound track only (i-motion without video track, such as singer’s
voice) for incoming PushTalk calls.
When you select a Chaku-Uta Full
®
that has a choice of specified playback ranges from
[MUSIC]
The screen for selecting a type of setting appears. If you select [Full song], the entire track
of Chaku-Uta Full
®
is set for the ring tone. If you select [Point], the specified playback
range of Chaku-Uta Full
®
is set for the ring tone.
To mute the ring tone
Select [Silent].
To check the ring tone
Move the cursor to the ring tone and press (Play).
6
Set the volume of the ring tone at [Ring volume].
Select from [OFF] and [1 to 6].
ˎ
For an incoming voice, videophone, or PushTalk call, you can set [STEP DOWN] and [STEP
UP]. [STEP DOWN] turns down the volume every six seconds and [STEP UP] turns up the
volume every six seconds.
To set the ring tone volume to [OFF]
Press at level 1. When you set the ring tone volume for incoming calls, incoming mail, or
both incoming calls and mail to [OFF], “
”, “ ”, or “ ” appears in the stand-by display
respectively.