User's Manual Part 2

347
Network Services
Notes on the service for the videophone
●
When the Voice Mail Service takes a videophone message
for you, it is notified to you by SMS.
●
To change the settings of the Voice Mail Service for
videophone support, press in
the stand-by display and operate as instructed by the
guidance.
●
A videophone of AV32K type is disabled for connection to
the Voice Mail Service Center.
●
When you connect to the Voice Mail Service Center using
Chara-den, the DTMF operation is not available. From the
function menu, select [DTMF send mode] (P.73).
Using the Call Waiting Service
When there is another incoming call while you are on a
call, the in-call ring tone notifies you of the second call.
You can answer the second call by putting the first call
on hold. You can also put your current call on hold and
place a call to another party.
ˎ
When you receive a videophone call during a voice call,
you can answer the videophone call by disconnecting the
voice call. You cannot answer a voice/videophone call that
arrives during a videophone call. However, it is saved in the
Received record.
ˎ
To use the Call Waiting Service, set the Arrival Call Act (P.350)
to [Answer]. If it is set to other operation, you cannot answer a
second voice call received while you are on a voice call even
if the Call Waiting Service is activated.
1
From the Menu, select [Settings]
→
[Management]
→
[NW Services]
→
[Call Waiting] and press
.
2
Set each item.
Menu item Operation
Activate
Select [Activate]
→
[Yes].
Deactivate
Select [Deactivate]
→
[Yes].
Check setting
Select [Check setting].
●
To put the current call on hold and answer an incoming
call, press (Call). When you put a call on hold, the
message “Connecting” appears. Every time you press
(Switch), you can switch between the calls. To
disconnect the put on hold call, from the Function menu,
select [Release Hold Call].
●
To disconnect the current call and answer an incoming
call, press and .
Using the Call Forwarding
Service
The Call Forwarding Service forwards a voice or
videophone call to a preset forwarding number when
you are in a location without the radio wave, the FOMA
terminal is powered off, or you do not answer the call
within the preset ring time.
ˎ
When the Call Forwarding Service and Record Message
(P.69) are set simultaneously, and if you want to give priority
to the Call Forwarding Service, set the ring time for the Call
Forwarding Service shorter than the time before starting the
answering message for the Record Message.
ˎ
When the Call Forwarding Service is set to “Activate” and if
you do not answer an incoming voice or videophone call, the
call is saved in the Received record as a “Missed call” and
the notification icon “ ” (Missed call) appears in the stand-by
display.
ˎ
When you receive a videophone call, the call is disconnected
if the forwarding number does not support a videophone
feature compliant with 3G-324M.
■
Basic flow of the Call Forwarding Service
Step 1
Save the forwarding number.
Step 2
Activate the Call Forwarding Service.
Step 3
Receive a call on your FOMA terminal.
Step 4
If you do not answer the call, it is automatically
forwarded to the specified forwarding number.
1
From the Menu, select [Settings]
→
[Management]
→
[NW Services]
→
[Call Forwarding] and press
.
2
Set each item.
Menu item Operation
Activate
※
Select [Activate]
→
[Activate]/[Set+Activate]
(
→
Enter the forwarding number and ring
time)
→
[Yes].
ˎ
When you select [Set+Activate],
you can set the forwarding number
(within 26 digits) and ring time (000
to 120 seconds) and activate the Call
Forwarding Service.
ˎ
When 2in1 is set to the B mode, you
cannot select the method of activating
the Call Forwarding Service.
Deactivate
※
Select [Deactivate]
→
[Yes].
Change FWD
number
Select [Change FWD number]
→
Enter
the forwarding number (within 26 digits)
→
Select [Set]/[Set+Activate].
ˎ
When 2in1 is set to the B mode, select
[Change FWD number]
→
enter the
forwarding number (within 26 digits)
→
select [Yes].
If FWD number
busy
Set whether to connect to the Voice Mail
Service Center when the forwarding
number is busy.
Select [If FWD number busy]
→
[Not
connect]/[Connect].
Check setting
Select [Check setting].
ˎ
When 2in1 is set to either the B or Dual
mode, the screen for selecting either
Number A or Number B appears.
※
When 2in1 is set to the Dual mode, the screen for selecting
either Number A or Number B appears.
Continued