User's Manual Part 2
332
Other Convenient Functions
Using the Earphone/Microphone
with Switch
<Earphone/microphone with switch>
When you connect the Flat-plug Earphone/Microphone
with Switch (optional), etc. to the Earphone/Microphone
Jack, you can answer a voice, videophone, or PushTalk
call, place a voice call by simply pressing its switch.
You can also set Earphone/Microphone operation.
●
Do not wind the cord of the Earphone/Microphone around
the FOMA terminal. Doing so may cause the radio wave
condition to be degraded.
●
Placing the cord of the Earphone/Microphone close to the
antenna may cause noise.
Using the Switch to Place a Call
You can place a voice call to the first phone number
saved as the Memory number (P.332) of the Phonebook
using the switch on the Earphone/Microphone.
ˎ
When the Personal data lock is set, the call cannot be placed.
1
Connect the Earphone/Microphone to the FOMA
terminal.
ˎ
Open the cover of the Earphone/Microphone Jack and
insert the plug of the Earphone/Microphone into the jack.
2
Press the switch on the Earphone/Microphone for
over a second in the stand-by display.
The beep sounds and the call is connected to the recipient.
Talk when the recipient answers the call.
3
Press the switch on the Earphone/Microphone for
over a second to hang up.
The beep sounds and the call is disconnected.
●
If a Phonebook memory number that is saved as Secret is
set for the Memory number, set the Secret display to [ON]
if you want to use the switch on the Earphone/Microphone
to place a call.
●
When you use the MUSIC Player while the FOMA terminal
is folded, you cannot use the switch to place a call.
Using the Switch to Receive a Call
1
When receiving a call, press the switch on the
Earphone/Microphone for over a second.
The beep sounds and the call is connected.
2
Press the switch on the Earphone/Microphone for
over a second to hang up.
The beep sounds and the call is disconnected.
●
When you answer a videophone call using the switch on
the Earphone/Microphone, a substitute image is sent to
the caller.
●
You cannot end communication using the switch on the
Earphone/Microphone during PushTalk communication.
Press to end communication.
Setting the Operation of the Earphone/
Microphone with Switch
You can set whether to permit the switch on the
Earphone/Microphone to place a voice call. You can
also set a Phonebook memory number to be used
for placing a voice call by pressing the switch on the
Earphone/Microphone.
1
From the Menu, select [Settings]
→
[Call]
→
[Headset setting]
→
[Headset sw. to call] and
press
.
Ｈｅａｄｓｅｔ ｓｗ． ｔｏ ｃａｌｌ
Ｓｅｔ
ＯＦＦ
Ｍｅｍｏｒｙ ｎｕｍｂｅｒ
９９９
2
Select [Voice call]/[OFF] of the switch on the
Earphone/Microphone at [Set].
[Voice call]:
Use the switch on the Earphone/Microphone to place a
voice call.
[OFF]:
Do not use the switch on the Earphone/Microphone.
3
Enter a memory number from the Phonebook used
for placing a voice call at [Memory number].
Enter from 000 to 999.
4
Press (Complete).
The Headset sw. to call is set.
●
If you delete phonebook data of the phone number that is
set for the Memory number, the default Memory number
setting 999 is restored.