User's Manual Part 2

328
Other Convenient Functions
Setting a Function to Be Activated
in the TV Styl
e
<Display rotated appli>
When you switch the FOMA terminal to the TV style
in stand-by status, you can set the functions to be
activated automatically.
1
From the Menu, select [Settings]
→
[Display]
→
[Stand-by display]
→
[Display rotated appli] and
press
.
[Activate 1Seg]:
Activate One Seg.
[Camera]:
Activate the Shoot by photo.
[Movie]:
Activate the Movie shoot.
[Full Browser]:
Activate Full Browser.
[OFF]:
Do not activate anything.
2
Select a function to be activated and press .
The Display rotated appli is set.
Recording Recipient’s or Your
Own Voice
<Voice memo>
Your own voice during stand-by and the recipient’s
voice during a voice call can be recorded.
Up to three voice memos of up to about 15 seconds
each can be recorded.
ˎ
When you record a voice memo during a call in addition to
the already recorded three voice memos, the oldest memo is
automatically overwritten by the new one. When you record
a voice memo during stand-by, the screen for confirming
whether to overwrite the oldest voice memo appears.
ˎ
For information on playing back and deleting the voice memo,
see P.72.
Recording Your Own Voice during
Stand-by
1
Press in the stand-by display, select [Rec
voice memo]
→
[Yes] and press .
１１／１０ ２１：０８
Ｒｅｃ ｖｏｉｃｅ ｍｅｍｏ
The recording starts. When the recording ends, a beep
sounds.
To stop the recording on the way
Press (Stop).
●
If there is an incoming call/mail or the Alarm/Schedule
alarm/Booking alarm time comes while recording a voice
memo during stand-by, the recording stops and the voice
memo recorded until then is saved.
Recording Recipient’s Voice during a
Call
1
Press during a call.
The recording starts. When the recording ends, a beep
sounds.
To stop the recording on the way
Press (Stop).
●
When the FOMA terminal is folded while recording a voice
memo during a call, the recording is stopped and the
recorded voice memo is saved if the Setting when folded
is set to [Holding] or [Disconnect] and the recording is
continued if set to [Mute].
Checking the Call Duration and
Charge
<Call duration/cost>
You can check the call duration and charge for the last
and total voice and videophone calls.
ˎ
The call duration and charge displayed are estimated and
may not be real values. The call charge does not include
consumption tax.
1
From the Menu, select [Settings]
→
[Management]
→
[NW Services]
→
[Call Cost/Duration] and
press
.
The Call Cost/Duration display appears.
[Last call cost]:
Display the call charge for the last voice call at
[Voice call] and the last videophone call/64K data
communication at [Digital]. The call charge is counted
only when you place a call.
[Last call duration]:
Display the call duration for the last voice call at
[Voice call] and the last videophone call/64K data
communication at [Digital]. The call duration is counted
when you receive a call as well as place a call.
[Total calls cost]:
Display the total call charge from the last reset to the
present time.
[Total calls duration]:
Display the total call duration from the last reset to the
present time.
2
Select the item and press .