User's Manual Part 2

324
Other Convenient Functions
At the Schedule Alarm Time
The alarm sounds for about 30 seconds with the
indicator flashing and the schedule data is displayed.
If there are several overlapping schedules with the
same start time of the alarm, the number of schedules
you have in addition is shown as “XXX” on the upper
right of the display.
Ｓｃｈｅｄｕｌｅ
１２：００
Ｌｕｎｃｈ ｍｅｅｔｉｎｇ
To stop the alarm tone
Press any key.
When you do not stop the alarm
tone
The Schedule display appears.
To turn off the Schedule display,
press (OK), , or .
●
If you set an i-motion with video and sound tracks to the
alarm tone, a movie in the i-motion is displayed.
●
If the alarm time comes during a voice call or PushTalk
communication, the default alarm tone sounds and default
alarm image is displayed. The vibrator does not operate.
●
The Schedule alarm does not operate in the following
cases.
- When the FOMA terminal is powered off
- While the Lock all is set
- While the Personal data lock is set
- While the Omakase Lock is set
- While updating the software
●
If the alarm time comes in the following cases, the
Schedule alarm may operate when the status changes to
during a call or stand-by.
- While placing/receiving a voice/videophone call or
originating/receiving a PushTalk call
- During packet communication
- During the infrared communication/while the infrared
remote control is being used
- During the iC communication
- During data communication or while reading/writing
data from/into a microSD memory card on a PC with the
FOMA terminal connected using the USB cable
- While recording a still image/movie
- Beep while receiving Area Mail, while sounding Area
Mail ring tone, or displaying Area Mail
●
If you leave the FOMA terminal with the battery pack
removed or fully expended for a long period of time, the
date and time is reset, and the Schedule alarm may not
operate correctly.
Setting the Schedule Alarm Operations
You can set the details of the operations of the
Schedule alarm.
1
Press (Func) in the calendar.
The Function menu appears.
2
Select [Schedule setting]
→
[Schedule alarm] and
press .
Ａｌａｒｍ ｓｅｔｔｉｎｇ
Ａｌａｒｍ ｔｏｎｅ
Ａｌａｒｍ（ｓｔｄ）
Ａｌａｒｍ ｖｏｌｕｍｅ
４
Ａｌａｒｍ ｉｍａｇｅ
スケシ゛ュールアラーム 鳴動中
Ｖｉｂｒａｔｏｒ ＯＦＦ
Ｃｏｌｏｒ
Ｃ５
3
Select an alarm tone from MUSIC/i-motion/Melody
of the Data Box at [Alarm tone].
ˎ
You can set the following files. You can select a Chaku-
Uta
®
from [i-motion].
Category
File
format
File size Image size
MUSIC
※
AAC-LC/
HE-AAC
Max. 5M bytes
−
i-motion
※
MP4
Max. 10M bytes Max. [VGA(640
×
480)]
Melody SMF/MFi Max. 350K bytes
−
※
Some files may not be set.
When you select a Chaku-Uta Full
®
that has a choice of
specified playback ranges from [MUSIC]
The screen for selecting a type of setting appears. If you
select [Full song], the entire track of Chaku-Uta Full
®
is
set for the alarm tone. If you select [Point], the specified
playback range of Chaku-Uta Full
®
is set for the alarm
tone.
To mute the alarm tone
Select [Silent].
To check the alarm tone
Move the cursor to the alarm tone and press (Play).
4
Set the volume at [Alarm volume].
Select from [OFF] and [1 to 6].
To set the volume to [OFF]
Press at level 1.