User's Manual Part 2

269
Data Display/Edit/Management
Rotating an Image
An image of [sQCIF(128
×
96)], [QCIF(176
×
144)],
[QVGA(240
×
320)], [CIF(352
×
288)], [VGA(640
×
480)], and [Stby(480
×
864)] can be rotated.
Example: Rotating an image and saving by overwriting
1
From My picture file list, select an image, press
, and press (Func).
The Function menu appears.
2
Select [Edit photo]
→
[Rotate] and press .
3
Press (Rotate) and press (OK).
Every time you press
(Rotate), the image rotates
clockwise by 90 degrees.
4
Press (Save), select [Overwrite], and press .
The rotated image is saved by overwriting the original
image.
To save as a new image
Select [Save new]
→
a place to save to.
Converting the Image Size
You can convert an image size into [sQCIF(128
×
96)],
[QCIF(176
×
144)], [QVGA(240
×
320)], [CIF(352
×
288)], or [Stby(480
×
864)].
Example: Converting an image size and saving
1
From My picture file list, select an image, press
, and press (Func).
The Function menu appears.
2
Select [Edit photo]
→
[Select size]
→
a size of an
image to be converted and press .
ˎ
The image size displayed in gray is not available for size
conversion.
3
Press (Save), select [Yes]
→
a place to save
to, and press .
The size-converted image is saved.
●
Some of the image size cannot be converted into the
selected size.
Storing an Image at the Data Security
Service Center
You can use the Data Security Service to store up to
10 GIF/JPEG images at one time at the Data Security
Service Center.
ˎ
Data Security Service is a paid service that requires a
subscription. For details on this service, see the “Mobile Phone
User’s Guide
【
i-mode
】
”.
ˎ
You cannot store a file that contains an image larger than
100K bytes and an image that is prohibited from being
retrieved out of the FOMA terminal.
1
Press (Func) in the file list of My picture.
The Function menu appears.
2
Select [Store in Center] and press .
The Security code screen appears.
3
Enter the Security code and press .
The Select&save display appears.
4
Select an image and press .
ˎ
To store several images, repeat step 4.
5
Press (Complete).
The screen for confirming whether to store the image
appears.
6
Select [Yes] and press .
The call is connected to the Data Security Service Center
and the image is stored. When the storing is completed,
the storing result display appears.