User's Manual Part 2

267
Data Display/Edit/Management
●
When the file list of images in the microSD memory card is
displayed, you cannot perform the Rcv loc. Info or Delete
loc. Info.
●
It may take time to display a file list or images saved in the
microSD memory card.
●
If you edit a recorded image on a PC, etc., “ ” may be
displayed instead of the thumbnail.
●
When the image cannot be displayed, “ ” appears.
●
You can send a still image using the high-speed infrared
communication (P.298).
Displaying Images as a Slideshow
You can automatically switch and display a JPEG
image saved in My picture of the Data Box or microSD
memory card.
1
Press (Func) in My picture file list.
The Function menu appears.
2
Select [Slideshow] and press .
Ｓｌｉｄｅｓｈｏｗ
Ｉｎｔｅｒｖａｌ ３ｓｅｃ
3
Select the time during which an image is displayed
at [Interval].
ˎ
The interval may vary depending on the size of the
displayed images.
4
Press (Activate).
The slideshow starts.
To stop the slideshow
Press (Stop).
Editing Still Images
<Edit photo>
You can edit a JPEG image saved in My picture by
pasting a stamp, a frame, etc.
ˎ
You cannot edit preinstalled images or images prohibited
from being retrieved out of the FOMA terminal.
ˎ
Some images may not be edited.
ˎ
Images may become inferior by editing repeatedly.
Pasting a Frame
A frame can be pasted to an image of [sQCIF(128
×
96)], [QCIF(176
×
144)], [QVGA(240
×
320)], [CIF(352
×
288)], and [Stby(480
×
864)].
Example: Pasting a frame and saving by overwriting
1
From My picture file list, select an image, press
, and press (Func).
The Function menu appears.
2
Select [Edit photo]
→
[Frame] and press .
3
Select a frame and press .
To check a frame
Move the cursor to a frame and press (Play).
4
Press (Save), select [Overwrite], and press .
The image with the frame is saved by overwriting the
original image.
To save as a new image
Select [Save new]
→
a place to save to.
Pasting a Stamp
A stamp can be pasted to an image of [sQCIF(128
×
96)], [QCIF(176
×
144)], [QVGA(240
×
320)], [CIF(352
×
288)], and [Stby(480
×
864)].
Example: Pasting a stamp and saving by overwriting
1
From My picture file list, select an image, press
, and press (Func).
The Function menu appears.
2
Select [Edit photo]
→
[Image stamp] and press .
3
Select a stamp and press .
To check a stamp
Move the cursor to a stamp and press (Play).
4
Use / to adjust the position and press
(Paste).
To add the same stamp
Repeat step 4.
To paste another stamp
Press (Retry) and perform step 3 to 4 again.
5
Press (OK).
6
Press (Save), select [Overwrite], and press
.
The image with the stamp is saved by overwriting the
original image.
To save as a new image
Select [Save new]
→
a place to save to.
Continued