User's Manual Part 2

264
Full Browser
Displaying the Entire Page While
Scrolling
You can set whether to display the entire page
automatically while scrolling.
1
From the Full Browser menu, select [Full Browser
setting]
→
[PagePilot setting] and press .
2
Select [Valid in scrl]/[Invalid] and press .
The PagePilot setting is set.
Setting the Movement Speed of the
Pointer
You can set a speed to move the pointer.
1
From the Full Browser menu, select [Full Browser
setting]
→
[Pointer speed setting] and press .
2
Select a movement speed of the pointer and
press .
Select from [1(Slow)], [2 to 4], or [5(Fast)].
Setting Whether to Open a New
Window Automatically
You can set whether to open a website in a new
window automatically when JavaScript of a website
requests to open a new window.
1
From the Full Browser menu, select [Full Browser
setting]
→
[Window Open Guard] and press .
[Valid]:
Do not open a website in a new window.
[Invalid]:
Open a website in a new window.
2
Select [Valid]/[Invalid] and press .
The Window Open Guard is set.
Setting Whether to Send Referer
Referer is the information of a link origin. If you send
Referer, the access information of which page is used
to connect is sent to a site.
You can set whether to send Referer when you select
the link while viewing a website.
ˎ
Under no condition will DoCoMo be held liable for any reveal
of your information to third parties because of using Referer.
ˎ
Some websites may not be displayed correctly when Referer
is not sent.
1
From the Full Browser menu, select [Full Browser
setting]
→
[Referer setting] and press .
2
Select [Send]/[Unsend]/[Notify] and press .
The Referer setting is set.
Setting Whether to Use the Full
Browser Function
You can set whether to use the Full Browser function.
1
From the Full Browser menu, select [Full Browser
setting]
→
[Access setting] and press .
[Yes]:
Full Browser can be used.
[No]:
The Access setting display appears when you activate
Full Browser.
2
Select whether to use the Full Browser function
and press .
3
Select [OK] and press .
The Access setting is set.
●
When you change the UIM to another UIM, the Access
setting changes to [No].
Checking the Settings of Full Browser
1
From the Full Browser menu, select [Full Browser
setting]
→
[Check settings] and press .
The contents of the settings appear.
Restoring the Default Settings of Full
Browser
You can restore the default settings of Full Browser.
1
From the Full Browser menu, select [Full Browser
setting]
→
[Reset settings] and press .
The Security code screen appears.
2
Enter the Security code and press .
3
Select [Yes] and press .
The default settings of Full Browser are restored.