User's Manual Part 2

249
One Seg
You can also set a timer for watching/recording a program
using a program information provided by the program
guide i-
α
ppli, site, mail, etc.
If the Alarm, Schedule alarm, and Booking alarm are set to
start at the same time, the following priority is applied.
1. Schedule alarm
2. Booking alarm
3. Alarm
If there is a timer that is set to start at the same time as the
new timer for recording a program, the confirmation screen
appears. If you select [Yes], the previously saved timer for
recording a program is overwritten by the new one.
When the ending or starting date and time set for the
previously saved timer for recording a program is the same
as the starting or ending date and time set for the newly
saved one respectively, the confirmation screen appears.
If you select [Yes], the preceding timer terminates slightly
earlier than the specified time.
If the Booking list is updated because of the saved
reservation being started while editing a reservation
or other reason, the reservation may not be saved
successfully.
If the repeat type of the schedule set for the 31st is set to
[Month], the schedule is set for the last day of the month
for months with less than 31 days.
At the Booking Alarm Time
The alarm tone sounds for about 30 seconds with the
indicator flashing.
Booking alarm
18:00
 ○ テレビ
 明日の天気
ON
30secbefore
Eyd
10 Count
To stop the alarm tone
Press any key. When you stop the alarm tone, the
display informing the release of the alarm appears. To
turn off the display, press (OK) or .
When you do not stop the alarm tone
The display informing the release of the alarm appears.
To turn off the display, press (OK) or .
When the Cfm. activation is set to [ON]
After you turn off the display informing the release of the
alarm, the Cfm. activation display appears. Select [Yes]
to activate One Seg.
When the Cfm. activation is set to [OFF]
Press for over a second to activate One Seg.
If you set an i-motion with video and sound tracks to the
alarm tone, a movie in the i-motion is displayed.
If the alarm time comes during a voice/videophone call or
PushTalk communication, the default alarm tone sounds
and default alarm image is displayed. The vibrator does
not operate.
The Booking alarm does not operate in the following
cases.
- When the FOMA terminal is powered off
- While the Lock all is set
- While the Personal data lock is set
- While the Omakase Lock is set
- While updating the software
If the alarm time comes in the following cases, the alarm
may operate when the status changes to during a call or
stand-by.
- While placing/receiving a voice/videophone call or
originating/receiving a PushTalk call
- During packet communication
- During the infrared communication/while the infrared
remote control is being used
- During the iC communication
- During data communication or while reading/writing
data from/into a microSD memory card on a PC with the
FOMA terminal connected using the USB cable
- While recording a still image/movie
- While the Schedule alarm is sounding
- Beep while receiving Area Mail, while sounding Area
Mail ring tone, or displaying Area Mail
If you leave the FOMA terminal with the battery pack
removed or fully expended for a long period of time, the
date and time is reset, and the Booking alarm may not
operate correctly.
At the Timer Recording Starting Time
A recording is automatically started. When the timer
for recording a program starts while One Seg is
not activated, “ ” appears. After the recording is
completed, the notification icon “ ” (Timer Rec result)
appears in the stand-by display.
ˎ
Extend the One Seg Antenna fully while recording a program.
Timer Rec result
  
 1
To check the reservation result
Press (Link) in the stand-by display and select “ ”.
Preparing to Rec
の不思議
の不思議
毎週木曜よる
10
時〜
225
ペンギンの一生
豆知識
クイズ
撮影裏話
次回予告
×
ch
Continued

Summary of content (186 pages)