User's Manual Part 1

81
PushTalk
2
Select a received record and press .
When a PushTalk call is originated, the signal tone sounds.
●
If a member is disconnected during PushTalk communication among several persons, the disconnected
member can come back to the session using the Redial/Received record as long as the other members
continue it. When the PushTalk communication is already ended, the call is going to be a new one.
Adding a Member during PushTalk Communication
If you originate a PushTalk call, you can add a member during PushTalk communication.
You can add members up to the maximum number allowed for communication (up to five
persons including yourself) and also place a second call to a non-participating member.
Example: Selecting a member from the PushTalk phonebook
1
Press (Add) during PushTalk communication.
The screen for selecting the method of adding a member appears.
[View PushTalk PB] :
Select a member from the PushTalk phonebook.
[View phonebook] :
Select a member from the FOMA terminal phonebook.
[Direct input] :
Enter a phone number directly.
2
Select [View PushTalk PB] and press .
携帯あき子
携帯なつ子
携帯はる子
ドコモ一郎
ドコモ二郎
Ｍｅｍｂｅｒ
To select a member from a group
Press (Group) and select a group.
3
Select a member and press .
“ ” appears for the selected member.
4
Press (Complete).
The Members to add display appears.
5
Press (Call).
Ｍｙｓｅｌｆ
携帯あき子 Ｃｏｎｎｅｃｔｅｄ
ドコモ一郎 Ｃｏｎｎｅｃｔｅｄ
ドコモ二郎 Ｃｏｎｎｅｃｔｅｄ
携帯はる子 Ｃａｌｌｉｎｇ
Ｏｎ ＰｕｓｈＴａｌｋ
The FOMA terminal starts calling the selected member.
●
Members added during PushTalk communication are not displayed in the detailed information of the Redial/
Received record.
●
You can add a party who uses a PushTalk-compatible model, as a PushTalk group member. However, this
added member is not displayed on the displays of non-compatible models and the signal tone does not
sound either.