User's Manual Part 1
221
Osaifu-Keitai/ToruCa
●
Reading/writing of data on the IC card from the software
is interrupted in the following cases. Partially read/written
data may be discarded.
- When the time preset for the Schedule alarm, Booking
alarm, or Alarm occurs
- When receiving a voice, videophone, or PushTalk call
(The operation that takes place after you hang up the
call may be different depending on the service you use.)
- When the battery runs out
Using the Osaifu-Keitai
When you hold up and show the FeliCa mark “ ” side
of the FOMA terminal to a reading device, you can use
the FOMA terminal for payment as e-money or use it in
place of a train ticket. You can use this function without
starting up the associated software.
ˎ
You can use Osaifu-Keitai by holding up and showing the
FeliCa mark to a reading device during a call or i-mode
connection. You cannot start the software.
ˎ
Holding up and showing the FeliCa mark to a reading device
may cause the associated software to be executed.
When the FOMA terminal comes within the
communication range with the reading device, the
FeliCa Sign lights in green. The vibrator vibrates when
the communication starts.
●
If the FeliCa mark on the FOMA terminal is not recognized
by a reading device, move the terminal back and forth and
side to side as you hold it up to the device.
●
Even if the FOMA terminal is powered off, you can use the
Osaifu-Keitai by holding up and showing the FeliCa mark
to a reading device. You cannot use it if the battery pack
is not attached. You may not be able to use Osaifu-Keitai
if the attached battery pack has not been used for a long
period of time or has not been charged after the battery
alarm was sounded. In this case, charge the battery
pack and power on the FOMA terminal. When the FOMA
terminal is powered off, you cannot start an Osaifu-Keitai-
compatible i-
α
ppli to read/write data on the IC card.
●
Note that if you leave the FeliCa Sign lighting, the battery
drains faster.
●
When the FOMA terminal comes within the communication
range with the reading device while charging the battery,
the Charge indicator and FeliCa Sign light at the same
time.
What is ToruCa?
ToruCa is an e-card that can be obtained using
Osaifu-Keitai. This convenient e-card can be used for
applications such as flier, restaurant card, or coupon.
You can obtain ToruCa cards from a reading device
or site. These e-cards can be easily exchanged by
way of e-mail, infrared communication, or the microSD
memory card.
The ToruCa card you obtained is saved in [ToruCa] of
the [Osaifu-Keitai] menu.
You need a ToruCa-compatible terminal to use ToruCa.
For details, see the “Mobile Phone User’s Guide
【
i-mode
】
”.
Flow of ToruCa Operation
ＴｏｒｕＣａ
１／８
１２：４５
赤坂
炭火・焼肉レストラン
１１／１３
築地
江戸前 ○○○
１１／０８
銀座
とんかつ △△△
１１／０８
六本木
サロン △□△
１１／０７
赤坂
フレンチ ○□○
１１／０５
品川
割烹 ○△○
Hold up and show the Osaifu-Keitai
to a reading device in order to obtain
a ToruCa card.
When the FOMA terminal comes
within the communication range with
the reading device, the FeliCa Sign
lights in green. The vibrator vibrates
and the FeliCa Sign flashes when the
communication starts.
Beep!
Select an obtained ToruCa card from the ToruCa list.
Methods for Obtaining a ToruCa Card
Exchange a ToruCa card between
i-mode terminals
Mail
Infrared/
iC communication
Site
microSD memory card
QR code
i-
α
ppli
Reading device
●
When you exchange a ToruCa card using i-mode
communication, the regular packet communication charge
is required.
●
Some ToruCa cards may not allow you to update or
redistribute using mail or infrared communication, etc.
depending on the settings by IP (information service
providers).