User's Manual Part 1

217
i-
α
ppli
Displaying i-
α
ppli Data in
microSD memory card
<i-
α
ppli(microSD)>
You can display i-
α
ppli data saved in the microSD
memory card, using a folder name.
1
From the Menu, select [i-appli]
→
[i
α
ppli(microSD)]
and press
.
ｐｐｌｉ ｄａｔａ
Ｆｏｌｄｅｒ１
Ｆｏｌｄｅｒ２
Ｆｏｌｄｅｒ３
Ｆｏｌｄｅｒ４
The i-
α
ppli(microSD) folder list display appears.
To delete a folder
Move the cursor to a folder and from the Function menu,
select [Delete folder]. Enter the Security code and select
[Yes].
2
Select a folder and press .
The SW description display appears.
Using Various i-
α
ppli Functions
Using the Camera Function from
i-
α
ppli
You can use the camera function (P.142) from the
software running on the FOMA terminal.
ˎ
Images are used and saved in the software.
ˎ
Items that can be set and the startup procedure of the
camera vary depending on the software.
1
While running the software, start the camera function.
The Camera mode display appears.
2
Point the camera at the object and press .
The image is recorded.
Using the Bar Code Reader from
i-
α
ppli
You can use the bar code reader (P.157) from the
software running on the FOMA terminal.
ˎ
The startup procedure of the bar code reader varies
depending on the software.
ˎ
The scanned data may be used in the software.
1
While running the software, start the bar code reader.
The Bar code reader display appears.
2
Locate at the JAN/QR code at the center of the
display and press
.
The JAN/QR code is scanned.
Using Infrared Communication from
i-
α
ppli
You can use the infrared communication (P.295) from
the software running on the FOMA terminal.
ˎ
There are some data that cannot be exchanged even if the
other device is equipped with the infrared communication
function.
ˎ
The startup procedure of the infrared communication varies
depending on the software.
1
While running the software, start the infrared
communication.
2
Select [Yes] and press .
The infrared communication is started.
Obtaining a ToruCa Card from i-
α
ppli
You can obtain ToruCa cards from the software running
on the FOMA terminal and save them.
ˎ
You can obtain up to 100 ToruCa or ToruCa(detail) cards
each up to 1K bytes for a ToruCa card or 100K bytes for
a ToruCa(detail) card. The number of cards that can be
obtained may decrease depending on the data to be
obtained.
ˎ
The obtaining method of ToruCa cards varies depending on
the software.
1
While running the software, select a ToruCa card
and press
.
The screen for confirming whether to save data appears.
2
Select [Yes] and press .
The ToruCa card is obtained.
Saving the Alarm from i-
α
ppli
You can save the Alarm from the software running on
the FOMA terminal.
1
While running the software, perform the settings of
the Alarm.
2
Select [OK] and press .
The Alarm is saved.