User's Manual Part 1

207
i-
α
ppli
●
If you have deleted preinstalled software, you can
download it from “SO@Planet”.

[i Menu]
→
[
メニュー/検索
] (Menu/Search)
→
[
ケータイ電
話メーカー
] (Mobile Phone Manufacturers)
→
[SO@Planet]
(Japanese only)
●
The message “Terminal and UIM ID will be sent” may
appear when downloading. Select [Download] to
download. Since the “serial number of your mobile
phone/UIM (FOMA card)” is sent to IP (information service
providers) via the Internet, it might be accessed by a third
party.
●
The message “This software uses saved data” may appear
when downloading. Information on the saved data to be
used can be confirmed by pressing [Description]. Select
[Download] to download the software. The i-
α
ppli uses
the saved data in this case.
●
If you lock the IC card function while downloading an
Osaifu-Keitai-compatible i-
α
ppli, the downloading is
stopped.
●
After downloading i-
α
ppli with mail, i-
α
ppli with mail
folder is automatically created in Inbox, Outbox, and Draft.
The folder is named based on the downloaded i-
α
ppli
with mail and cannot be changed.
●
If only the mail folder to be used remains when
downloading i-
α
ppli with mail, that folder can be used. If
a folder name is different from the name of a downloaded
i-
α
ppli, this folder name is changed to the downloaded
i-
α
ppli name. If the i-
α
ppli with mail does not use that
folder, it can be deleted and a new folder can be created.
Note that the i-
α
ppli with mail cannot be downloaded
without creating a new folder.
●
Even if there is enough memory, you may not be able to
download an Osaifu-Keitai-compatible i-
α
ppli depending
on the volume of data saved on your IC card. If you cannot
perform a download, delete unnecessary software data in
accordance with the confirmation screen and download
the i-
α
ppli again. (You may not be able to delete some
software data.) In some cases, you may need to start up
the software before deleting related data on the IC card.
Checking i-
α
ppli Information When
Downloading
The software information can be displayed when
i-
α
ppli software is downloaded from a site.
1
From the Menu, select [i-appli]
→
[i
α
ppli setting]
→
[SW description] and press
.
2
Select [Yes]/[No] and press .
The SW description is set.