User's Manual Part 1

206
i-
α
ppli
What is i-
α
ppli?
By downloading i-
α
ppli from its site, the i-mode
terminal can be made much more useful in many ways.
For example, you can enjoy many kinds of games by
downloading them to it. There are also i-
α
ppli from
which you can directly save data to the Phonebook and
Schedule, as well as i-
α
ppli that can be linked with
Data Box for saving/loading images.
ˎ
For details on i-
α
ppli, see the “Mobile Phone User’s Guide
【
i-mode
】
”.
ˎ
Some i-
α
ppli cannot be used when 2in1 is set to either the B
or Dual mode.
Downloading i-
α
ppli from a Site
You can download i-
α
ppli software from sites and
save it.
ˎ
You can save up to 100 i-
α
ppli software, each software
maximum 1M bytes. The number of i-
α
ppli software that can
be saved may decrease depending on the data to be saved.
ˎ
When downloading ends in failure due to the radio wave
condition, the software is not saved.
ˎ
When downloading i-
α
ppli with mail, software cannot be
downloaded if there are already five mail folders for i-
α
ppli
with mail or if software using the same mail folder already
exists.
1
While displaying the site, select the software and
press
.
The software is downloaded.
When the screen for confirming whether to download the
software appears
Select [Yes] or [Download].
2
Select a folder and press .
The downloaded software is saved in the selected folder.
3
Perform the Software setting.
ＳＷ ｉｎｉｔ． Ｓｅｔｔｉｎｇ
ＮＷ ｓｅｔｔｉｎｇ
Ｙｅｓ
ｐｐｌｉ ｓｔａｎｄ−ｂｙ
Ｎｏ
Ｕｓｅ ｌｏｃａｔｉｏｎ ｉｎｆｏ
Ｙｅｓ
Ｐｒｏｇｒａｍ ｇｕｉｄｅ ｋｅｙ
Ｎｏ
ˎ
There are items that cannot be changed depending on
the software.
To connect to the network automatically when the software
is started
Select [NW setting]
→
[Yes].
ˎ
Settings you made are applied to the NW setting and
Stand-by NW setting of the Individual set (P.209).
To set the software for the i-
α
ppli stand-by display
Select [i
α
ppli stand-by]
→
[Yes].
To use the location information
Select [Use location info]
→
[Yes].
To set the software to start using the Program guide key
when you watch One Seg
Select [Program guide key]
→
[Yes]. The software
already set to the Program guide key is canceled.
ˎ
The software that can be set to the Program guide
key is only one of the software that is able to work with
One Seg.
4
Press (Complete).
The screen for confirming whether to run the software
appears.
5
Select [Yes] and press .
The downloaded software is started.