User's Manual Part 1

185
Mail
Receiving i-mode Mail
<Auto receive>
When mail is sent to the i-mode center, the FOMA
terminal automatically receives them.
Ｒｅｃｅｉｖｉｎｇ ｍａｉｌ
Ｕｎｒｅａｄ ｍａｉｌ／ｍｅｓｓａｇｅ
Ｍａｉｌ
ＭｅｓｓａｇｅＲ
ＭｅｓｓａｇｅＦ
１
０
０
While receiving mail, “ ” flashes.
To cancel receiving mail
Press (Cancel). “ ” appears
in the next display informing
the completion of reception.
Receiving may be completed
depending on the timing of
cancellation.
When receiving is completed, “ ” is
displayed, the indicator flashes, the
ring tone sounds, and the number
of received mail is displayed.
The display before receiving
reappears after about 15 seconds.
ˎ
When returning to the stand-by
display, the notification icon “
”
(New mail) appears. Press
(Link) and select “ ” to display
the Inbox display.
●
You can automatically receive up to 100K bytes of data
in each mail, including the file attachment. You have to
manually obtain a file attachment exceeding 100K bytes
from the i-mode center (P.189).
●
If new mail is received when the number of saved received
mail has reached 1,000 or there is not enough free space,
the unprotected read mail is overwritten from the oldest.
●
When you receive multiple mail at the same time, the ring
tone, call picture, and indicator color of the last received
mail have priority.
●
Mail that has been sent to you in the following situations is
held at the i-mode center.
- During a videophone call
- When the FOMA terminal is powered off
- When the FOMA terminal is outside of the i-mode
service area
- During PushTalk communication
- While receiving SMS
- While the Self mode is set
- While the Omakase Lock is set
- During the infrared communication
- During the iC communication
- While updating the software
- While connected to the FirstPass Center
- While connected to the Data Security Service Center
●
Some mail is held at the i-mode center when “ ” appears
(sometimes “ ” does not appear even if mail is held at the
i-mode center).

If the maximum number of mail is held at the i-mode
center, “ ” appears. In this case, check the contents of
unread mail, delete unnecessary received mail, or cancel
protection of received mail before performing the Check
new message.
●
When the size of received mail (number of characters
and file attachment size) has exceeded the number
of characters (data size) specified at Limit Mail Size
accessible through [i Menu]
→
[English iMenu]
→
[Options]
→
[Mail Settings], the file attachment cannot be
received automatically.