User's Manual Part 1

171
i-mode/i-motion/i-Channel
Operating the SSL List
<SSL certificate>
You can set to validate/invalidate the certificate that is
required to connect to an SSL site.
1
From the i-mode menu, select [i-mode setting]
→
[SSL list] and press
.
ＳＳＬ ｌｉｓｔ １３
ＣＡ ｃｅｒｔ． １
ＣＡ ｃｅｒｔ． ２
ＣＡ ｃｅｒｔ． ３
ＣＡ ｃｅｒｔ． ４
ＣＡ ｃｅｒｔ． ５
ＣＡ ｃｅｒｔ． ６
ＣＡ ｃｅｒｔ． ７
ＣＡ ｃｅｒｔ． ８
ＣＡ ｃｅｒｔ． ９
ＣＡ ｃｅｒｔ．１０
ＣＡ ｃｅｒｔ．１１
ＤｏＣｏＭｏ ｃｅｒｔ．１
[CA cert.]:
An authentication company issues these certificates.
They are saved in the FOMA terminal at the time of
purchase.
[DoCoMo cert.]:
This certificate is required for connecting to the FirstPass
Center and FirstPass-compatible sites and is saved on
the UIM (green/white).
[User cert.]:
This certificate is downloaded from the FirstPass Center
by [User certificate] and is saved in the UIM (green/
white).
To check the certificate
Move the cursor to the certificate and press .
2
Select an SSL certificate and press (Set).
The Security code screen appears.
3
Enter the Security code and press (OK).
The Valid/Invalid display appears.
4
Select [Valid]/[Invalid] and press .
The SSL certificate is set.
When set to [Invalid], “ ” changes to “ ”. The SSL
communication is canceled when connecting to an SSL
site that requires a certificate.
Setting the FirstPass
<User certificate>
You can issue and download the user certificate from
the FirstPass Center.
The user certificate certifies that you are a FOMA
subscriber. The downloaded user certificate is saved
on the green/white UIM (FOMA card) and enables you
to use FirstPass-compatible sites.
ˎ
You cannot use the user certificate using the blue UIM.
ˎ
To connect to the FirstPass Center, set the date and time
(P.43).
ˎ
The screens and operation methods displayed by the
FirstPass Center may change.
ˎ
While the FOMA terminal is connected to the FirstPass Center,
you cannot send/receive mail or receive Message R/F.
ˎ
The User certificate is not available overseas.
1
From the i-mode menu, select [i-mode setting]
→
[User certificate] and press
.
ＦｉｒｓｔＰａｓｓ
・ ＦｉｒｓｔＰａｓｓ をご利用いた
だくためには、
ユーサ゛ 証明書
の発行申請、
タ゛ウンロート゛ が必
要です。
・「次へ」を選択して、
ユーサ゛
証明書の発行申請、 タ゛ウンロー
ト゛
を行ってください。
・当
サイト の閲覧 ／ ご利用にあ
たっての
ハ゜ケット 通信料は無
料です。
次へ
／Ｅｎｇｌｉｓｈ
2
Select [English] and press .
ＦｉｒｓｔＰａｓｓ
Ｒｅｑｕｅｓｔ ｙｏｕｒ ｃｅｒｔｉｆｉｃａ
ｔｅ
Ｄｏｗｎｌｏａｄ ｙｏｕｒ ｃｅｒｔｉｆｉｃ
ａｔｅ
Ｏｔｈｅｒ ｓｅｔｔｉｎｇｓ
Ｔｈｅ ｕｓａｇｅ ｒｅｇｕｌａｔｉｏｎ （
Ｊａｐａｎｅｓｅ ｏｎｌｙ）
3
Select [Request your certificate]
→
[Continue] and
press
.
The PIN2 code input screen appears.
To void the issued certificate
Select [Other settings]
→
[Revoke your certificate]
→
[Yes], enter the PIN2 code, and select [Continue]
→
[Continue]
→
[Continue].
4
Enter the PIN2 code and press (OK).
ˎ
If you do not enter the PIN2 code within 15 seconds, the
request for issuing your certificate is canceled.
5
Select [Download]
→
[Continue] and press .
ＦｉｒｓｔＰａｓｓ
Ｒｅｑｕｅｓｔｉｎｇ ａ ｃｅｒｔｉｆｉｃａｔｅ
ｉｓ ｃｏｍｐｌｅｔｅｄ．
Ｄｏｗｎｌｏａｄ ｔｈｅ ｃｅｒｔｉｆｉｃａｔｅ
．
Ｄｏｗｎｌｏａｄ／Ｍｅｎｕ
The user certificate is downloaded and added to the list of
SSL certificates (P.171).
Continued