User's Manual Part 1

114
Sound/Display/Light Settings
2
Select [ON]/[OFF] of adjusting automatically at [Auto setting].
3
Set the main display light brightness at [Adjust light].
Select from [1 to 5].
To reset to the default brightness
Press (Reset).
4
Select [ON]/[OFF] of the Keypad light at [Keypad light].
5
Select [Backlight always on] and press .
Ｂａｃｋｌｉｇｈｔ ａｌｗａｙｓ ｏｎ
Ｃｈａｒｇｉｎｇ
ＯＦＦ
Ｖｉｄｅｏｐｈｏｎｅ
ＯＮ
Ｉｎｔｅｒｎｅｔ
ＯＦＦ
Ｐｉｃｔ． ｓｈｏｏｔ
ＯＮ
Ｍｏｖｉｅ ｓｈｏｏｔ
ＯＮ
Ｍｏｖｉｅ ｐｌａｙ
ＯＮ
[Charging] :
Set whether to keep the light on during charging.
[Videophone] :
Set whether to keep the light on during a videophone call.
[Internet] :
Set whether to keep the light on while displaying sites or Internet
home pages.
[Pict. shoot] :
Set whether to keep the light on while recording a still image.
[Movie shoot] :
Set whether to keep the light on while recording a movie.
[Movie play] :
Set whether to keep the light on while playing back a movie.
6
Select [ON]/[OFF] of the Backlight always on for each item and press .
7
Select [ON]/[OFF] of whether to turn on the indicator when the FOMA terminal is
folded at [LED set when folded].
●
It may take time to complete charging when [Charging] of the Backlight always on is [ON].
●
The brightness of the main display while watching One Seg is set at the Display light (P.246).
●
When the Auto setting is set to [ON], the brightness is automatically adjusted based on the value set at the
Adjust light.
Saving Power for the Display
<Power saver>
The display is automatically turned off to save battery power when no operations are
made for a specific period. You can set the time before turning off the display.
1
From the Menu, select [Settings]
→
[Display]
→
[Power saver] and press .
2
Select a time before starting the Power saver mode and press .
Select from [1min], [3min], [5min], [10min], [15min], and [30min].
●
While a function for which the Backlight always on is set to [ON] is in use, a slideshow is running, the
software update (rewrite) is in progress, the Camera mode is active, and One Seg is activated, the Power
saver mode does not work.
●
The Power saver mode may be canceled if there is an incoming call, an activation of the Alarm or Schedule
alarm, etc.