User's Manual Part 1

113
Sound/Display/Light Settings
4
Select a color of the font to be displayed at [Disp. call/rcv. No.].
[dark] :
Set the darker color for the display or call record display when placing/receiving a call
by/for Number A, or the font for the received/sent mail lists of Address A.
[light] :
Set the lighter color for the display or call record display when placing/receiving a call
by/for Number A, or the font for the received/sent mail lists of Address A.
[None specified] :
Do not specify the color of the font.
ˎ
When 2in1 is set to ON, the information of Number A/Address A is displayed in the font color which is
set at the Disp. call/rcv. No. To display the information of Number B/Address B in the different color, you
can set at the Set call/receive No. of the 2in1 setting (P.353).
Setting the Display for the Sub-display
<Sub display>
You can set the clock type or format, or display when receiving mail to display in the sub-
display and the time before starting the Power saver for the sub-display.
1
From the Menu, select [Settings]
→
[Display]
→
[Sub display] and press .
Ｓｕｂ ｄｉｓｐｌａｙ ｓｅｔｔｉｎｇ
Ｍａｉｌ ｒｅｃｅｉｖｅ ｄｉｓｐｌａｙ
Ｆｒｏｍ／Ｓｕｂｊｅｃｔ
Ｃｌｏｃｋ
Ｄｉｇｉｔａｌ ｃｌｏｃｋ１
Ｃｌｏｃｋ ｓｔｙｌｅ
１２ｈ
Ｐｏｗｅｒ ｓａｖｅｒ
１５ｓｅｃ
[Mail receive display] :
Set whether to display the sender or subject in the sub-
display when receiving mail.
[Clock] :
Set the clock type to be displayed in the sub-display.
[Clock style] :
Set the format to display the clock in the sub-display.
[Power saver] :
Automatically turn off the sub-display if no operation is
performed for a specific period.
2
Select a display of receiving mail at [Mail receive display].
[From/Subject] :
Display the sender and subject.
[Only notice] :
Display the message “Completed”.
3
Select a clock type at [Clock].
Select from [Digital clock1 to 5].
4
Select the format to display the clock in the sub-display at [Clock style].
[12h] :
Display in 12-hour format.
[24h] :
Display in 24-hour format.
5
Set a time before starting the Power saver mode at [Power saver].
Select from [15sec], [30sec], [1min], and [2min].
Setting the Display and Keypad Illumination
<Backlight>
You can set the main display light brightness, ON/OFF of the keypad light, and whether
to turn on the light of the main display and sub-display.
1
From the Menu, select [Settings]
→
[Display]
→
[Backlight] and press .
Ｂａｃｋｌｉｇｈｔ
Ａｕｔｏ ｓｅｔｔｉｎｇ
ＯＮ
Ａｄｊｕｓｔ ｌｉｇｈｔ
３
Ｋｅｙｐａｄ ｌｉｇｈｔ
ＯＮ
Ｂａｃｋｌｉｇｈｔ ａｌｗａｙｓ ｏｎ
ＬＥＤ ｓｅｔ ｗｈｅｎ ｆｏｌｄｅｄ
ＯＮ
[Auto setting] :
Set whether to adjust the main display light brightness
and set ON/OFF of the keypad light automatically by the
Brightness Sensor to adapt for the surrounding brightness.
[Adjust light] :
Set the main display light brightness.
[Keypad light] :
Set whether to turn on the keypad light.
[Backlight always on] :
Set whether to keep the main display light on all the time
including at the time of charging or recording.
[LED set when folded] :
Set whether to turn on the indicator when the FOMA
terminal is folded. The indicator color follows that set in
the Incoming set of the Incoming call.
Continued