User's Manual Part 1

103
Sound/Display/Light Settings
5
Select a ring tone from MUSIC/i-motion/Melody of the Data Box at [Ring tone].
ˎ
You can set the following files. You can select a Chaku-Uta
®
from [i-motion].
Category File format File size Image size
MUSIC
※
AAC-LC/HE-AAC Max. 5M bytes
−
i-motion
※
MP4 Max. 10M bytes Max. [VGA(640
×
480)]
Melody SMF/MFi Max. 350K bytes
−
※
Some files may not be set. You cannot set an i-motion with video track only. You can set only an
i-motion with sound track only (i-motion without video track, such as singer’s voice) for incoming
PushTalk calls.
When you select a Chaku-Uta Full
®
that has a choice of specified playback ranges from [MUSIC]
The screen for selecting a type of setting appears. If you select [Full song], the entire track
of Chaku-Uta Full
®
is set for the ring tone. If you select [Point], the specified playback range
of Chaku-Uta Full
®
is set for the ring tone.
To mute the ring tone
Select [Silent].
To check the ring tone
Move the cursor to the ring tone and press (Play).
6
Set the volume of the ring tone at [Ring volume].
Select from [OFF] and [1 to 6].
ˎ
For an incoming voice, videophone, or PushTalk call, you can set [STEP DOWN] and [STEP UP]. [STEP
DOWN] turns down the volume every six seconds and [STEP UP] turns up the volume every six seconds.
To set the ring tone volume to [OFF]
Press at level 1. When you set the ring tone volume for incoming calls, incoming mail, or both
incoming calls and mail to [OFF], “ ”, “ ”, or “ ” appears in the stand-by display respectively.
7
Set a vibration pattern at [Vibrator].
Ｓｅｌｅｃｔ ｖｉｂｒａｔｏｒ
Ｐａｔｔｅｒｎ１
Ｐａｔｔｅｒｎ２
Ｌｉｎｋ ｍｅｌｏｄｙ
ＯＦＦ
[Pattern1] :
Set a short intermittent vibration.
[Pattern2] :
Set a long intermittent vibration.
[Link melody] :
Set vibration to be synchronized with the vibration pattern of the
melody. When you set the ring tone to [Silent] or the melody is not
specified with a vibration pattern, [Pattern1] is used.
[OFF] :
Do not set the vibrator.
When you set the vibrator for incoming calls, incoming mail, or both
incoming calls and mail, “ ”, “ ”, or “ ” appears in the stand-by
display respectively.
To check the vibration
Move the cursor to the vibration pattern and press (Confirm).
8
Select an indicator color at [Color].
Select from 12 colors plus [C13:ALL] (in which the 12 colors flash in turn).
When you move the cursor through the colors, the incoming indicator flashes accordingly.
9
Select [Ring time] and press .
ˎ
You can set the ring time for incoming mail, Message R, and Message F.
10
Select [ON]/[OFF] of the ring tone at [Set].
11
Enter the duration for sounding the ring tone at [Ring time].
Enter the duration within the range from 01 to 30 seconds.
12
Press (Complete).
The Ring time is set.
Continued