User's Manual

27Calling
To voice dial
1 From standby press and hold down
a volume key.
2 Wait for the tone and say a recorded
name, for example “John mobile”.
The name is played back to you and
the call is connected.
Voice answering
When you use a handsfree, you can
answer or reject incoming calls with
your voice.
To activate voice answering and
record voice answer commands
1 From standby select Menu > Settings
> the General tab > Voice control >
Voice answer > Activate.
2 Follow the instructions that appear and
select Cont. Wait for the tone and say
“Answer”, or another word.
3 Select Yes to accept or No for a new
recording.
4 Follow the instructions that appear
and select Cont. Wait for the tone
and say “Busy”, or another word.
5 Select Yes to accept or No for a new
recording.
6 Follow the instructions that appear
and select Cont.
7 Select where your voice answering
is to be activated.
To answer a call using voice
commands
• Say “Answer”.
To reject a call using voice commands
• Say “Busy”.
Forwarding calls
You can forward calls, for example,
to an answering service.
To forward calls
1 From standby select Menu > Settings
> the Calls tab > Forward calls.
2 Select a call type and a forward
option.
3 Select Activate.
4 Enter the number to forward calls
to and select OK.
More than one call
You can handle more than one call at
a time. For example, you can put an
ongoing call on hold, while you make
or answer a second call. You can also
switch between the two calls. You
cannot answer a third call without
ending one of the first two calls.
When Restrict calls is used, some
forward call options are not available.
See Restricted dialing on page 29.
W760_UG_AE_1216_2287_1.book Page 27 Friday, July 11, 2008 2:41 PM