User's Guide Part 2

23Calling
To record a voice command using
voice dialing
1 From standby select Menu > Settings
> the General tab > Voice control >
Voice dialing > Activate.
2 Select Yes > New voice command and
select a contact. If the contact has
more than one number, select the
number to add the voice command to.
3 Record a voice command such as
“John mobile”.
4 Follow the instructions that appear.
Wait for the tone and say the
command to record. The voice
command is played back to you.
5 If the recording sounds OK, select
Yes
. If not, select No and repeat steps
3
and 4.
To rerecord a voice command
1 From standby select Menu > Settings
> the General tab > Voice control >
Voice dialing > Edit names.
2 Scroll to a command and select
Options > Replace voice.
3 Wait for the tone and say the
command.
Voice dialing
You can call a contact by saying the
name.
To voice dial
1 From standby press and hold down ~
volume key.
2 Wait for the tone and say a recorded
name, for example “John mobile”. The
name is played back to you and the
call is connected.
The magic word
You can record and use a voice
command as a magic word to activate
voice dialing without pressing any
keys. Your handsfree must be
connected to your phone when using
the magic word.
To activate and record the magic
word
1 From standby select Menu > Settings
> the General tab > Voice control >
Magic word > Activate.
2 Follow the instructions that appear
and select Cont.. Wait for the tone and
say the magic word.
Voice commands are saved in the phone
memory only. They cannot be used in
another phone.
You should choose a long, unusual word
or phrase that can easily be
distinguished from ordinary background
speech. Bluetooth handsfree does not
support this feature.