User's Guide

27Calling
To voice dial
1 From standby press and hold down a
volume key.
2 Wait for the tone and say a recorded
name, for example “John mobile”. The
name is played back to you and the
call is connected.
Voice answering
When you use a handsfree, you can
answer or reject incoming calls with
your voice.
To activate voice answering and
record voice answer commands
1 From standby select Menu > Settings
> the General tab > Voice control >
Voice answer > Activate.
2 Follow the instructions that appear
and select Cont.. Wait for the tone and
say “Answer”, or another word.
3 Select Yes to accept or No for a new
recording.
4 Follow the instructions that appear
and select Continue. Wait for the tone
and say “Busy”, or another word.
5 Select Yes to accept or No for a new
recording.
6 Follow the instructions that appear
and select Cont..
7 Select where your voice answering is
to be activated.
To answer a call using voice
commands
• Say “Answer”.
To reject a call using voice
commands
• Say “Busy”.
Forwarding calls
You can forward calls, for example, to
an answering service.
To forward calls
1 From standby select Menu > Settings
> the Calls tab > Forward calls.
2 Select a call type and a forward
option.
3 Select Activate.
4 Enter the number to forward calls to
and select OK.
More than one call
You can handle more than one call at
a time. For example, you can put an
ongoing call on hold, while you make
or answer a second call. You can also
switch between the two calls. You
cannot answer a third call without
ending one of the first two calls.
When Restrict calls is used, some call
forwarding options are not available. See
Restricted dialing on page 29.