User's Guide

31Calling
To call your voicemail service
• From standby press and hold down
.
Voice control
By creating voice commands you can:
• Voice dial – call someone by saying
their name
• Answer and reject calls when you
use a handsfree
To record a voice command using
voice dialling
1 From standby select Menu > Settings
> the General tab > Voice control >
Voice dialling > Activate.
2 Select Yes > New voice command and
select a contact. If the contact has
more than one number, select the
number to add the voice command to.
3 Record a voice command such as
“John mobile”.
4 Follow the instructions that appear.
Wait for the tone and say the
command to record. The voice
command is played back to you.
5 If the recording sounds OK, select
Yes. If not, select No and repeat steps
3 and 4.
Voice dialling
You can hear your recorded contact
name when you receive a call from
that contact.
To voice dial
1 From standby press and hold down a
volume key.
2 Wait for the tone and say a recorded
name, for example “John mobile”. The
name is played back to you and the
call is connected.
Voice answering
When you use a handsfree, you can
answer or reject incoming calls with
your voice.
To activate voice answering and
record voice answer commands
1 From standby select Menu > Settings
> the General tab > Voice control >
Voice answer > Activate.
2 Follow the instructions that appear
and select Cont.. Wait for the tone and
say “Answer”, or another word.
Voice commands are saved in the phone
memory only. They cannot be used in
another phone.