User's Guide Part 2

28 Calling
To enter your voicemail number
1 From standby select Menu > Messaging
> Settings > Voicemail number.
2 Enter the number and select OK.
To call your voicemail service
• From standby press and hold down
.
Voice control
By creating voice commands you can:
• Voice dial – call someone by saying
their name.
• Answer and reject calls when you
use a handsfree.
To record a voice command using
voice dialling
1 From standby select Menu > Settings
> the General tab > Voice control
> Voice dialling > Activate.
2 Select Yes > New voice command and
select a contact. If the contact has more
than one number, select the number to
add the voice command to.
3 Record a voice command such as
“John mobile”.
4 Follow the instructions that appear.
Wait for the tone and say the command
to record. The voice command is played
back to you.
5 If the recording sounds OK, select Yes.
If not, select No and repeat steps
3 and 4.
Voice dialling
You can hear your recorded contact
name when you receive a call from that
contact.
To voice dial
1 From standby press and hold down
a volume key.
2 Wait for the tone and say a recorded
name, for example “John mobile”.
The name is played back to you and
the call is connected.
Voice answering
When you use a handsfree, you can
answer or reject incoming calls with
your voice.
Voice commands are saved in the phone
memory only. They cannot be used in
another phone.