User's Guide Part 5

63 More features
Draft for Sony Ericsson Internal Use Only
set a passcode to open the code
memo.
Checkword
The checkword confirms that you
have entered the correct passcode. If
the passcode is correct, the correct
codes are shown. If the passcode is
incorrect, the checkword and the
codes shown are also incorrect.
To open code memo for the first time
1 From standby select Menu > Organizer
> Code memo.
2 Follow the instructions that appear
and select Cont..
3 Enter a passcode and select Cont..
4 Confirm the passcode and select
Cont..
5 Enter a checkword and select Done.
To add a code
1 From standby select Menu > Organizer
> Code memo.
2 Enter a passcode and select Cont..
3 Scroll to New code and select Add.
4 Enter a name associated with the
code and select Cont..
5 Enter the code and select Done.
To change a passcode
1 From standby select Menu > Organizer
> Code memo.
2 Enter your passcode and select Cont..
3 Select Options > Change passcode.
4 Enter your new passcode and select
Cont.
5 Re-enter the new passcode and select
Cont..
6 Enter a checkword and select Done.
Forget your passcode?
If you forget your passcode, you must
reset the code memo. This means that
all entries in the code memo are
deleted. The next time you enter the
code memo, you must proceed as if
you are opening it for the first time.
See To open code memo for the first
time
on page 63.
To reset code memo
1 From standby select Menu > Organizer
> Code memo.
2 Enter any passcode to access the
code memo. The checkword and
codes that are then shown are
incorrect.
3 Select Options > Reset.
4 Reset code memo? appears.
5 Select Yes.
Profiles
You can change settings such as the
ring volume and vibrating alert to suit