User's Manual Part 2

61More features
Code memo
You can save security codes, for
example, for credit cards. You must
set a passcode to open the code
memo.
Checkword
The checkword confirms that you
have entered the correct passcode. If
the passcode is correct, the correct
codes are shown. If the passcode is
incorrect, the checkword and the
codes shown are also incorrect.
To open code memo for the first time
1 From standby select Menu > Organizer
> Code memo.
2 Follow the instructions that appear
and select Cont..
3 Enter a passcode and select Cont.
4 Confirm the passcode and select
Cont.
5 Enter a checkword and select Done.
To add a code
1 From standby select Menu > Organizer
> Code memo.
2 Enter a passcode and select Cont.
3 Scroll to New code and select Add.
4 Enter a name associated with the
code and select Cont..
5 Enter the code and select Done.
To change a passcode
1 From standby select Menu > Organizer
> Code memo.
2 Enter your passcode and select
Options.
3 Select Options > Change passcode.
4 Re-enter the new passcode and select
Cont.
5 Enter a checkword and select Done.
Forget your passcode?
If you forget your passcode, you must
reset the code memo. This means that
all entries in the code memo are deleted.
The next time you enter the code memo,
you must proceed as if you are opening
it for the first time. See To open code
memo for the first time on page 61.
To reset code memo
1 From standby select
Menu > Organizer
> Code memo.
2 Enter any passcode to access the code
memo. The checkword and codes that
are then shown are incorrect.
3 Select Options > Reset.
4 Reset code memo? appears.
5 Select Yes.
Shinobu_UG_P1C.book Page 61 Friday, June 22, 2007 3:10 PM
0REFLIGHTEDBY
0REFLIGHTEDBY

